Official Maytag Washer Agitators

Agitator Directional Cogs

$4.39

Fix Number: FIX388034
Manufacturer Part Number: 80040

Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing all 4 directional cogs at the same time. The agitator directional cogs reach across the gear teeth in one direction and dig into the gear teeth in the other direction to create the needed agitation. This thrusting motion is what tumbles your clothes during the wash cycle. When the teeth on the outer edge are damaged, the cogs will not engage with the upper agitator, making it impossible to agitate as it should. If your machine makes unusual noises, shakes/moves while operating, or will not spin or drain properly, it may be time to replace them. To access this part, simply remove the softener dispenser and then the agitator cap. You will find them attached to the agitator. Each cog is approximately 1 inch long and made of a durable plastic.

Fixes these symptoms

Does not dispense fabric softener or detergent
Marks left on clothes
Not cleaning dishes properly
See more...

Watch the install video

Agitator Repair Kit

$14.01

★★★★★

10 Reviews

Fix Number: FIX334650
Manufacturer Part Number: 285811

This is an OEM agitator repair kit that includes an agitator cam, four directional cogs, a bearing, thrust spacer, inner cap seal, and washer. These parts are found inside the agitator auger near the top. This kit is used when the top portion of the agitator is not moving correctly but the bottom part is. The agitator is subjected to a lot of force during the wash cycle, so it is common for this part to wear over time, especially if you are consistently over-loading your washer. If your model has a softener dispenser, it will need to be removed to perform this repair. Agitator grease is recommended for this repair, but is not included in this kit.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Watch the install video

Agitator Cam Kit

$10.03

Fix Number: FIX334648
Manufacturer Part Number: 285809

This is an authentic OEM agitator cam kit for your washing machine. The kit includes a bearing, the cam holder, and four individual cams. You may need to replace the agitator cam if you find your washer is noisy, it shakes and moves, or it will not agitate. To do this repair we find it easiest to remove the agitator and you will need a 7/16 socket to do this. Once the agitator has been removed from the washer, you can remove the old cam kit from the top portion. The four individual cams are inserted into the cam holder, and the bearing holds them all in place. The assembly can be placed back inside the agitator, and then the agitator installed back inside the washer.

Fixes these symptoms

Spins slowly
Will not agitate
See more...

Watch the install video

Agitator Cap Barrier with Seal

$11.09

Fix Number: FIX11748113
Manufacturer Part Number: WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Watch the install video

Thrust Spacer

$7.62

★★★★★

1 Review

Fix Number: FIX334562
Manufacturer Part Number: 285587

The thrust spacer is a genuine OEM part that is more commonly known as a retainer ring. The spacer is made of white plastic and measures approximately 2.5 inches in diameter. This part is found in between the agitator and the auger in your direct drive washing machine. The space is used to support the auger and secure it on the agitator base. If your washer will not agitate, or is shaking or excessively noisy while running, you may need to replace the ring. Please note that this repair requires dual-action agitator grease, which is not included with this part.

Fixes these symptoms

Spins slowly
Will not agitate
See more...

Watch the install video

Agitator Repair Kit

$36.45

★★★★★

2 Reviews

Fix Number: FIX334622
Manufacturer Part Number: 285748

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.

Fixes these symptoms

Will not agitate
See more...

Washing Machine Upper Agitator

$97.08

Fix Number: FIX11727882
Manufacturer Part Number: W10836692

This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms