Admiral Washer Hardware
Start With Your Model Number
Find Parts Fast Guaranteed Fit Repair VideosNeed help finding your model number?
Popular Admiral Washer Hardware
Fix Number FIX11741866
Manufacturer Part Number WP358237This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the screw head is 7/16 inch, so you will need the appropriately sized socket to complete this repair. The new bolt comes with a rubber gasket and a threaded sealant.
Fixes these symptoms
- Marks left on clothes
- Spins slowly
- See more...
Screw, 8-16 x 1.000
Fix Number FIX11746167
Manufacturer Part Number WP8533953Sold individually.
Fix Number FIX11740701
Manufacturer Part Number WP308685This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers, cooktops, trash compactors, grills, and ice makers. *Please note: This part is sold individually.
Screw, 8/18 x 3/8
Fix Number FIX11746840
Manufacturer Part Number WP90767This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
Suspension Spring Retainer
Fix Number FIX11749057
Manufacturer Part Number WPW10145155This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Lid Hinge Mounting Screw
Fix Number FIX11748588
Manufacturer Part Number WPW10119828Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.