Kenmore Washer Hose Clamp WP285655 | Fix.com

Hose Clamp

&SeePartX&
Hose Clamp – Part Number: WP285655
Hose Clamp – Part Number: WP285655
Hose Clamp – Part Number: WP285655
https://fixcom.azureedge.net/Schematics/Maytag/WH8VIOZB.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This hose clamp is sold individually.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Washer, Dishwasher, Washer Dryer Combo, Refrigerator, Range Hood, Ice Maker, Air Conditioner, Food Waste Disposer, Polisher Buffer, Dryer.

Installation Instructions

Showing 1-3 of 3 Instructions

The drain hose had a hole in it and needed to be replaced

Removed the lower front panel, disconnected the hose and replaced it with the new one, then replace the panel. The most dificult part was getting my old self on the floor and unscrewing the panel nuts.

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Pump Hose , Check Drain Ball , Clamp , Hose Clamp , Hose Clamp
Difficulty Level: Easy
Total Repair Time: 30 - 60 mins
Tools: Pliers, Screw drivers, Socket set
Customer: Jacob from Center, TX

Leaking

Just with a nut driver to tighten the clamp

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Outer Tub to Pump Hose , Hose Clamp
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Nutdriver
Customer: greg from new martinsville, WV

Slight leak in tub drain hose

Unplug unit from electrical outlet. Remove two Phillips screws in bottom of front cover. Swing front cover up and off the washer. Loosen both hose clamps. Place a large rag (or several paper towels) around base of hose where it connects to the water pump. Gently loosen bottom of hose from water pump and remove. Gently loosen top of hose from tub drain and remove. Slide new hose top onto tub drain. Slip both new clamps onto hose (lower clamp screw should be on the inside of the hose so that there is no interference with rotating parts). Slide new hose bottom onto water pump. Tighten both clamps snuggly. Re-install front cover. Plug unit back in.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Outer Tub to Pump Hose , Hose Clamp
Difficulty Level: Really Easy
Total Repair Time: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: David from Middletown, PA
Showing 1-3 of 3 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX11740613
Manufacturer Part Number: WP285655


Brand
Model Number
Description
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Kenmore
11015952401
Washer