Admiral Washer Springs and Shock Absorbers

Fix Number

FIX11743345

Manufacturer Part Number

WP63907

This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. This part is approximately 2 inches in length when compressed, made of durable metal, and is sold individually. For this repair, you will need a 1/4 nut driver, putty knife, flat blade screwdriver, and a pair of needle-nose pliers. Before you begin, disconnect the power, fill hoses, and drain hose to give you easy and safe access (drain hose may release some water, have a small container or towel near by). Your appliance contains 3 suspension springs, so keep this in mind if you need to order multiple of this part. We suggest you purchase several at a time, as they can be very useful to have on-hand.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX11703290

Manufacturer Part Number

W10780048

The suspension rods help to keep the tub in your washing machine stable and secure while cycling through your laundry. If your washer is excessively vibrating, moving around, or very loud when operating, there may be an issue with your suspension. This authentic OEM replacement kit includes 4 rods, 4 suspension balls, and 4 bushings. The parts come assembled and ready to be installed. You will need to disconnect the power supply, water inlet and drain hoses from the washer before beginning this repair.

Fix Number

FIX11751118

Manufacturer Part Number

WPW10250667

This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.

Fix Number

FIX11738823

Manufacturer Part Number

WP21001598

This suspension spring is used with many washing machines. It is made entirely of metal and is seven inches long.

★★★★★

★★★★★

1 Review

Fix Number

FIX3502189

Manufacturer Part Number

W10440729

If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that your washer runs smoothly. If the supports have become broken or damaged, it can cause the appliance to shake, move, and be noisy while running. This kit includes 8 suspension rod supports, comprised of two different types with 4 of each included in the set. These are genuine OEM replacement suspension rod supports, which are made of plastic and measure approximately 1.5 inches in diameter.

Fix Number

FIX334620

Manufacturer Part Number

285744

This package of pads contains three tub wear pads.

Fix Number

FIX394983

Manufacturer Part Number

8316845

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

Fix Number

FIX11738845

Manufacturer Part Number

WP21002026

This snubber ring fits washers and is located between the leg and dome assembly. The ring has a diameter of 9 inches. It is used to reduce noise and vibration for stability when the washer is operating. If your washer shakes a lot and makes loud noises, then it is best to replace this part to solve your problem. The tools required for this repair are: short flathead screwdriver, flathead screwdriver, Philips screwdriver, 1/4 inch nut driver, 5/16 inch nut driver, 3/8 nut driver, ratchet with extension, putty knife, locking pliers, slip joint pliers, and 3/8 inch socket.

Fix Number

FIX334456

Manufacturer Part Number

285219

This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

Fix Number

FIX733376

Manufacturer Part Number

285901

This kit includes 3 springs.