Kenmore Refrigerator Parts

Kenmore Appliance Parts

Popular Kenmore Refrigerator Parts

★★★★★
★★★★★
1 Review
Fix Number
FIX734935
Manufacturer Part Number
240534901
This is a genuine door shelf retaining bar for a refrigerator. It attaches to the inside of the door on the refrigerator and helps to secure items placed on the shelf. It is made of white plastic and can be easily installed without the use of tools. Start by making sure the projection on the inner door panel fits into the recessed area at the top of the shelf retainer bar. Once they are lined up, press it into place until you hear a snap. This part measures approximately 25-inches wide, 3-inches high, and 5-inches deep. If it breaks, cracks or warps over time, it will need to be replaced. This part is sold as an individual part. We recommend taking this opportunity to inspect the other shelf retaining bars for damage in case they also need to be replaced at the same time.
Fixes these symptoms

Installation Instructions

Kathleen from Parsippany, NJ
Needed to replace a broken bottom door shelf retainer bar on our older fridge.
I took the shelf retainer bar out of the shipping box, looked at the middle shelf to see how the bar sits on the brackets, and put it on. Took about 2 minutes. No tools needed. Done! Easy peasy! Read more...
★★★★★
★★★★★
5 Reviews
Fix Number
FIX429868
Manufacturer Part Number
240337901
If the middle shelf on your refrigerator door is damaged, this is the OEM replacement part needed. Door shelves are great for organizing items in your appliance such as jars, containers, and condiments, and if broken can prevent the door from properly opening and closing. This white, plastic door shelf has open square larches and measures roughly 24-1/4 inches wide and 3-3/4 inches deep. This low effort repair requires very little time and zero tools. Fasten it directly to the door by sliding it in place, and your repair is complete.
Fixes these symptoms
  • Door won’t open or close
  • Noisy
  • Touchpad does not respond
  • See more...

Installation Instructions

Jennifer from Baton Rouge, LA
Missing door shelves
Just popped in place....perfect fit!!!! Thank you! Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX734936
Manufacturer Part Number
240534701
This middle shelf retainer bar attaches to the inside of the refrigerator door and helps to contain items on the shelf inside your appliance, like condiments and small containers. Its approximate size is 26 inches long, 3.5 inches tall, and made of white durable plastic. This part can start to wear or break over time, in which case it should be replaced. This is a beginner repair, that will not take any time at all. Start by removing the old part by pulling the tabs to release it. To install your new shelf, line it up with the shelf indents over the tabs, and gently press it down to lock in place. This is an OEM replacement part that is sold individually.
Fixes these symptoms

Installation Instructions

Gerard from Bayville, NY
door shelf retainer bar cracked in half
lifted each side of retainer bar off, slid new bar over moulded nubs on door, 123 done Read more...
Refrigerator Ice and Water Filter
$103.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11701542
Manufacturer Part Number
EDR1RXD1
Your refrigerator water and ice filter should be replaced at least every 6 months, to prevent water that has an undesirable taste and odor, or if left for too long, can cause leaks and ice maker malfunction. The location of this filter can vary depending on your model. Some common locations to check include the top right corner of the interior compartment, the bottom left grille, or the middle of the interior. This filter is an original manufacturer part and NSF-certified. It has a straightforward, quick-turn installation feature that does not require the use of tools.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Marilyn from Darrouzett, TX
Filter needed to be replaced
I opened the small door and observed how the arrows lined up on the bottom of the one in the slot. I pulled the cylinder our and placed the new one with the arrows pointing the same way and pushed it in and closed the small door. Then pushed the reset button until the green light came back. Be sure to take the coverings off the two openings! Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX11752778
Manufacturer Part Number
WPW10321304
This is a manufacturer-approved refrigerator door shelf bin, also sometimes referred to as the crisper bin. It is sold individually. It is made of clear plastic with a white plastic trim. It is used as a storage shelf for common refrigerator items, such as jars, bottles, cans, and condiments. When this part needs to be replaced it will be visually obvious. Over time, the plastic can sometimes crack or break due to the constant exposure to cold temperature and will need to be replaced. This is a very quick and easy repair that does not require any tools. You will simply lift up and out of place to remove, and slide the new bin onto the tabs, making sure it is level and secure before closing the refrigerator door.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...

Installation Instructions

Evelyn from Birmingham, AL
Changed water filter. No problem. It had never been changed. I had a cracked door bin that kept falling out.
Just turned off water supply. Popped the old filter out inserted the new one. Made sure it was secure. Turned the water supply back on. The self just snapped in place Read more...
Fix Number
FIX2358880
Manufacturer Part Number
241993101
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.
Fixes these symptoms

Installation Instructions

Michelle from Cypress, TX
Crisper cover support broke
I watched the video you had on your website---really easy-you guys ROCK! Read more...
Door Bin - Clear
$97.01
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX430122
Manufacturer Part Number
240356402
This is a genuine refrigerator door bin that holds items on the door of your appliance. This bin can be easily moved to accommodate for space. This bin is only available in clear plastic and replaces some bins that were originally white in color. This is a beginner repair that will not require any tools. The most common reasons for replacing this part is if it is cracked, damaged, or stained. Simply lift the bin out of place to remove, align the new bin up with the tabs on the side, and push down gently to secure. This bin is sold individually.

Installation Instructions

AYAOVI from LOUISVILLE, KY
Broken Door Bin
just took out the broken Door Bin and replace it. Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX429854
Manufacturer Part Number
240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms

Installation Instructions

Rosemarie from Pioneer, CA
renter ruined the crisper drawers and the bottom shelf.
open refrigerator removed old cracked pieces, and cleaned glass self. installed new parts in place. Took less than 5 minutes and it is much better. Read more...
Refrigerator Door Bin
$46.94
In Stock
★★★★★
★★★★★
6 Reviews
Fix Number
FIX429724
Manufacturer Part Number
240323001
This is a genuine OEM white plastic door bin for a refrigerator. It is mounted on the inner door and is designed so it can be easily moved to adjust for additional space as needed. It holds food items, such as bottles and jars. The cold temperatures of the refrigerator can cause plastic to become weak over time, and break. When the door bin is not secure in the inner door panel, it will need to be replaced. This part measures approximately 5.75-inches high, 16-inches wide, and 4.25-inches deep and is sold individually. This is a quick and easy repair, that does not require the use of any tools. The bin attaches to the refrigerator door by the back of the shelf itself.
Fixes these symptoms
  • Clicking sound
  • Door won’t open or close
  • Ice maker not making ice
  • See more...

Installation Instructions

Lester from Fort Myers, FL
broken shelves
very easy Read more...
★★★★★
★★★★★
1 Review
Fix Number
FIX430917
Manufacturer Part Number
240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms

Installation Instructions

Christine from Torrington, CT
Shattered glass shelf, broken shelf on door and broken track for deli drawer
Just put the parts where they belong Read more...

Kenmore Refrigerator Appliance Types

Related Kenmore Refrigerator Parts

Popular Kenmore Refrigerator Models