Official Kenmore Refrigerator Brackets and Flanges

Control Bracket

$19.41

Fix Number: FIX11739027
Manufacturer Part Number: WP2180226

The control bracket, also known as a dispenser control bracket, holds the switches and light socket for the water and ice dispenser on your freezer door. If you are having issues with the dispenser not providing water or ice, or your ice maker is not working, you may need to replace the control bracket. It is found behind the panel, or escutcheon, for the dispenser. Before beginning this repair, you should disconnect the power to your fridge as you will be working with electrical components. You will need to remove the spacers for the two switches and the light socket from the old bracket and place them on the new one. This is a genuine OEM replacement part.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Not dispensing water
See more...

Watch the install video

Ice Chute Door

$46.55

Fix Number: FIX1526426
Manufacturer Part Number: 241688401

An ice chute is mounted to the interior panel and extends between the interior panel opening and the dispenser opening for transferring ice through the chute door.

Fixes these symptoms

Door won’t open or close
Ice maker dispenses too much ice
Ice maker won’t dispense ice
See more...

Door Holder

$22.82

Fix Number: FIX3535435
Manufacturer Part Number: MEG61899901

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

Fixes these symptoms

Door won’t open or close
See more...

BRACKET

$40.91

Fix Number: FIX1527469
Manufacturer Part Number: 297092700

Watch the install video

Ice Maker Cover Bracket

$7.95

Fix Number: FIX11739245
Manufacturer Part Number: WP2198641

This is the replacement ice maker cover bracket for your refrigerator. It is made of white plastic and is approximately 5 inches wide and 2 inches long. The ice maker cover bracket holds and supports the ice maker cover. If the ice maker cover is loose or missing, you may need to replace the bracket. You will also want to replace the bracket if it will not stay in place, or if it is cracked or broken. To replace the cover bracket, simply remove the ice maker cover, then use a ¼ inch nut driver to loosen and remove the bracket. Screw in the new bracket and replace the cover to complete your repair. This is an OEM part that is sold individually.

Fixes these symptoms