Official Kenmore Refrigerator Drawers and Glides

Crisper Cover Support - Front

$3.89

Fix Number: FIX2358880
Manufacturer Part Number: 241993101

If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

Refrigerator Crisper Drawer with Humidity Control

$79.56

★★★★★

10 Reviews

Fix Number: FIX11739119
Manufacturer Part Number: WP2188656

This is a genuine OEM replacement crisper drawer for refrigerators. It is sold as an individual part. The crisper drawer with humidity control allows you to adjust the humidity within the crisper, which can help preserve the quality of your produce. It attaches to the inner part of the refrigerator to the bottom of the crisper shelf. If your crisper drawer is missing, cracked, damaged, or discolored, it needs to be replaced. It is made of durable clear plastic with a white handle and is sold individually. No tools are needed for installation, simply slide the new crisper drawer into the tracks.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Watch the install video

Refrigerator Crisper Pan

$116.78

★★★★★

1 Review

Fix Number: FIX429854
Manufacturer Part Number: 240337103

This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.

Fixes these symptoms

Door won’t open or close
Leaking
See more...

Watch the install video

Drawer Support Rail - Right Side

$44.89

★★★★★

1 Review

Fix Number: FIX430917
Manufacturer Part Number: 240530701

The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

Refrigerator Center Crisper Drawer Slide Rail - White

$50.67

★★★★★

3 Reviews

Fix Number: FIX11757048
Manufacturer Part Number: WPW10671238

This part is the center crisper drawer slide rail which helps to support the crisper drawers in your refrigerator. If you have difficulty opening or closing your crispers, the center slide rail may be broken and needs to be replaced. Too much weight on the shelf above or in the crisper drawers may cause the center slide rail to break. Replacing this part is easy and does not require any tools. First remove any items off the crisper shelf along with the crisper drawers, then carefully remove the glass shelf. Once you can access the broken center slide rail, gently pull forward on the crisper shelf frame and pull the rail out. Take your new part and line up the locator tab at the rear of the rail, pull the crisper shelf forward, and drop the new rail into place. You can then replace the glass shelf and the crisper drawers, which should now easily slide in with the new rail installed. This is a genuine OEM part, made of white plastic and approximately 13.5 inches in length.

Fixes these symptoms

Clicking sound
Door won’t open or close
Fridge and Freezer are too warm
See more...

Watch the install video

Center Rail

$21.89

★★★★★

4 Reviews

Fix Number: FIX11752912
Manufacturer Part Number: WPW10326469

This is a factory-certified center support rail for your refrigerator crisper drawer. This rail supports the center of the crisper frame, holding the drawer securely in place. It is made of white plastic, measures 15-inches long, and if broken, may cause your drawer to not close properly. This is a very quick and easy repair that does not require any tools. Simply slide the crisper drawers out, lift up the glass shelf, and slide the new support rail into place. This part is sold individually.

Fixes these symptoms

Door won’t open or close
Noisy
See more...

Watch the install video

Refrigerator Crisper Drawer With Handle

$65.59

★★★★★

4 Reviews

Fix Number: FIX11739122
Manufacturer Part Number: WP2188664

This clear convertible meat drawer is for the lower part of the refrigerator. It has an air duct that allows cold air to flow into the drawer from the freezer. It can be used to store meats and vegetables to help preserve them for longer. If the food that is kept inside it is going bad quicker than usual, it could be in need of a replacement. If the drawer is not moving in and out smoothly, check to make sure the tracks that it slides on are in good condition. If they are, the drawer itself may be damaged. Usually damage is visible, so do a quick inspection for cracks or warping. This part is sold separately and measures roughly 16 7/16 inches wide, 14 5/16 inches deep, 1 5/8 inches high, and like all the parts we sell, is OEM approved. Keep in mind that your refrigerator has multiple options for meat and vegetables drawers, so be sure to check your user manual to ensure you are ordering the one you need.

Fixes these symptoms

Door won’t open or close
Leaking
See more...

Watch the install video

Pantry End Cap Kit, LH and RH

$26.89

★★★★★

12 Reviews

Fix Number: FIX11738134
Manufacturer Part Number: W10874836

This pantry end cap kit is used to keep your refrigerator drawer from sliding all the way out. This kit includes both the right and left side end caps, and the pins which hold them in place. The manufacturer recommends replacing both sides at once, even if only one is broken, to ensure your drawer slides smoothly. This part is sold as a kit, unfortunately the manufacturer does not supply these parts for sale individually. If your end caps no longer hold the drawer in place, or if they have become visibly damaged, they need to be replaced. The dimensions are approximately 9 inches by 25 inches, and it is made of durable white plastic. For this repair, start by removing the 3 screws holding the end cap in place. Next, remove the pin and end cap and replace with the new one.

Fixes these symptoms

Door won’t open or close
Fridge too cold
Noisy
See more...

Watch the install video

Drawer Support Rail - Left Side

$48.77

Fix Number: FIX430916
Manufacturer Part Number: 240530601

If you notice that opening and closing the meat pan drawer in your refrigerator has become difficult, there may be an issue with the support rails. Regular wear and tear, or excess weight on the shelf can cause damage to the rail. This genuine OEM part is specifically for the left side of the drawer support. If you need to replace the right-side rail, that part can be purchased separately. Replacing this part is simple, and just requires the use of a screwdriver. Remove all items from the shelf and drawer in your fridge, remove the entire shelf assembly and place on a solid work surface, then use the screwdriver to remove the old rail. Line up the new rail, and screw back onto the shelf frame. Test that the drawer slides in and out easily, place everything back into the fridge, and you are done!

Fixes these symptoms

Door won’t open or close
See more...

Watch the install video

Crisper Glass Shelf Insert

$52.89

Fix Number: FIX429963
Manufacturer Part Number: 240350608

This glass shelf sits above the crisper drawers in your refrigerator. This part is just the glass, there are no brackets or additional mounting hardware (these can be purchased separately if needed). Regular wear and tear or excess weight can cause damage to the shelf, and it should be replaced if damaged. No tools are required to do this, simply remove the old part and carefully place the new shelf glass down ensuring it is lined up properly with the shelf lip. This is a genuine OEM part that measures 23.82 inches by 15.50 inches.

Kenmore Refrigerator Drawers and Glides

Popular Kenmore Refrigerator Drawers and Glides

Related Kenmore Refrigerator Parts

Kenmore Refrigerator Drawers and Glides

Start With Your Model Number

Popular Kenmore Refrigerator Drawers and Glides

Related Kenmore Refrigerator Parts