Official Kenmore Range Elements and Burners

Oven Bake Element

$47.55

Fix Number: FIX438018
Manufacturer Part Number: 316075103

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Watch the install video

Bake Element

$73.30

★★★★★

7 Reviews

Fix Number: FIX11703285
Manufacturer Part Number: W10779716

This authentic OEM bake element is square in shape with the terminals in the center and sits at the bottom of your oven. The purpose of this part is to heat your oven in order to cook your food. If your oven is not coming up to temperature, has hot spots, or will not heat up at all, you may need to replace the bake element. To complete this repair, you will need to disconnect the power to the appliance along with pulling it out far enough to access the back panel. Please note that the new element may look different from the original part in your range, but the replacement part will work with your model.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Watch the install video

Terminal Block Kit

$16.19

Fix Number: FIX470125
Manufacturer Part Number: 5303935058

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Watch the install video

Surface Element - 8 Inch - 2600W

$20.41

Fix Number: FIX2339242
Manufacturer Part Number: 316442301

The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it should be replaced. This is an easy repair that does not require any tools. Before beginning this repair, ensure that the elements are turned off and cold to the touch. With the element removed, inspect the terminals for signs of corrosion or arcing. If these are present, you will need to replace the terminal block as well, or you will have the same issues come up again. This OEM replacement part measures 8 inches in diameter with five coils.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Bake Element - 220V 2300W

$66.46

★★★★★

2 Reviews

Fix Number: FIX249466
Manufacturer Part Number: WB44X5082

The bake element provides heat to your range in order to cook your food. If your oven is not heating or has inconsistent temperatures, it may be time to replace the element. This is a genuine OEM replacement part for your range that measures approximately 15-1/4 inches long and 18-1/4 inches wide. It is a closed hinged style of element and is 220 volts and 2300 watts. Be sure to disconnect the power supply to your range before beginning this repair.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Watch the install video

Surface Element - 8 Inch - 220V

$34.49

Fix Number: FIX2339241
Manufacturer Part Number: 316442300

If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you find these, you will also need to replace the terminal block (which can be purchased separately). Replacing this part is easy and does not require any tools. Please ensure that the burner is turned off and cool to the touch before beginning the repair. Lift up and pull out the old element, then line up the new one and insert into the terminal block. This is a genuine OEM part that measures 8 inches in diameter, has four turns, 220 volts, and looped terminal ends.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Bake Element - Push On Terminals - 240V

$88.02

★★★★★

4 Reviews

Fix Number: FIX249286
Manufacturer Part Number: WB44T10011

The bake element sits at the bottom of the oven to provide heat for cooking and baking. You may need to replace the element if you notice your oven is not coming up to temperature, has hot spots, or if the element has shorted out or is arcing. A multimeter can be used to determine if there is an electrical issue with your element. If you need to replace the element, be sure to disconnect the power to your appliance before beginning this repair. This is a genuine OEM part which measures approximately 20 inches in length, 18 inches wide, and is made of metal. It has two terminals that fit into the power source receptacle found at the back of the oven. When replacing the element, be careful to keep the terminal wires from falling through into the back of the oven.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Watch the install video

Oven Bake Element

$42.89

★★★★★

2 Reviews

Fix Number: FIX11752501
Manufacturer Part Number: WPW10308477

The bake element is found the bottom of the oven, and is what provides the heat for cooking and baking. If your oven is not coming up to temperature, is not sustaining a consistent temperature, or is not heating up at all, there may be an issue with your bake element. This genuine OEM part is a replacement element designed to fit your model. Before beginning this repair, please be sure to disconnect the power supply to your oven. You will need a Phillips screwdriver and a pair of needle nose pliers to complete this repair.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Bake Element - 2600W 240V

$64.52

★★★★★

1 Review

Fix Number: FIX11740695
Manufacturer Part Number: WP308180

The bake element is found in the bottom of your oven, and is responsible for providing the heat for cooking. If your oven is not coming up to temperature, the temperature fluctuates, or it is not heating at all, there may be an issue with the bake element and it should be replaced. This part is an authentic OEM part, that measures approximately 15-3/4 inches long and 16-5/8 inches wide. The terminals measure approximately 3 inches long and they are spaced 1-3/4 inches apart. The electrical measurements for this element are 2600 watts and 240 volts. Before beginning this repair, be sure to disconnect the power supply to your range.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven is too hot
See more...

Bake Element - Push On Terminals - 240V

$102.94

★★★★★

1 Review

Fix Number: FIX249285
Manufacturer Part Number: WB44T10010

If your oven is not coming up to temperature, is not heating at all, or has inconsistent temperatures, it may be time to replace your bake element. The bake element is found at the bottom of your oven and is responsible for providing the heat in order to cook your food. When replacing this OEM part, you will want to disconnect power to your appliance, and pull it out from the wall so that you can access the back panel. Removing the oven racks, and even the oven door will make accessing the screws at the back of the oven easier. You will need to use pliers to disconnect the wires from the bake element terminal at the panel in the back of your range. You can then unscrew the element inside the oven to remove it. Replace it with the new bake element and install the screws back in place. The wires can then be reattached along with the back panel, and your oven should heat up properly again.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Kenmore Range Elements and Burners

Popular Kenmore Range Elements and Burners

Related Kenmore Range Parts

Kenmore Range Elements and Burners

Start With Your Model Number

Popular Kenmore Range Elements and Burners

Related Kenmore Range Parts