OEM Frigidaire Range Oven Bake Element [316075103] | Ships Today | Fix.com
Our response to COVID-19
We're open and continuing to ship packages. Learn about our response to COVID-19
Oven Bake Element – Part Number: 316075103
Oven Bake Element – Part Number: 316075103 Oven Bake Element – Part Number: 316075103 Oven Bake Element – Part Number: 316075103 https://fixcom.azureedge.net/Schematics/Frigidaire/L9ZDAD9Y.gif

Oven Bake Element

1 Review
Your Price
$41.20

Fix Number: FIX438018

Manufacturer #: 316075103

Manufactured by: Frigidaire

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

The bake element is located on the bottom of the oven cavity to supply heat for baking. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Works with the following brands

Frigidaire, Tappan, Kenmore, Crosley, Gibson, Westinghouse, Uni, Kelvinator, Admiral

Works with the following products

Range

Fixes the following symptoms

Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 4.5 / 5.0, 133 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Werkheiser from Saylorsburg, PA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Bake element broke
Extremely easy. I unscrewed two screws and pulled out old element and plugged in the new one. Pushed back in and screwed the screws back in. That's it
11 of 12 people found this instruction helpful.
Were these instructions helpful?
Customer:
boulders apts from amherst, MA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burnt out bake element
Removed 2 mounting bracket screws pulled element out from back of stove pulled terminals off removed then installed new one
6 of 7 people found this instruction helpful.
Were these instructions helpful?
Customer:
Pedro from DARTMOUTH, MA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Heat element needed to be replaced
SHUT THE POWER! Unscrew the 2 bolts from the rear. Pull the wires from the existing element and pin them to the new element easy.
3 of 4 people found this instruction helpful.
Were these instructions helpful?
Customer:
James from PEMBROKE, MA
Parts Used:
316075103
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Wife complained that oven was taking an unusaully long time to heat for baking.
1. Removed two (2) small sheet metal screws that secured the heating element to the rear of the oven.
2. Slid element out about four inches (4").
3. Unplugged the two (2) spade connectors.
4. Removed old element.
5. Installed new element in reverse order.

Happy wife, happy life!
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Richard from Portsmouth, NH
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Bake element burnt.
Very simple. Turn off breaker to range. Remove 2 (ea) #8 screws,pull element out, remove the 2 spade connectors. Install 2 spade connectors to new element, push into position, install 2(ea) #8 screws,turn breaker to range on & ops check; good to go.
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Eric from Kirkland, WA
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
oven element burned out
Simply unscrewed the two tabs at the back of the oven that are attached to the bottom burner element, pulled out the element which was attached to the wiring with quick clip connectors, detached the connectors and reattached the new element, and then screwed it back in. Turned on the oven and it worked like a charm.
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Jim from Spring Hill, FL
Parts Used:
316075103
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Element was burnt out
Turned power off to unit. Removed the 2 screws holding heating element on to back wall. Gently pulled element ends out of back wall exposing wire clips that make the connection. Pulled off clips, cleaned bottom of oven, put clips on new element, gently pushed wires back into unit, re-attached the screws. Turned power back on to unit. Ran it at 350 degrees for 10 minutes to burn off any chemicals from manufacturing and shipping.
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Dennis from Footville, WI
Parts Used:
316075103
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Bake element didn't heat.
1.Pull stove away from wall. 2.Unpug power cord 3.Using nutdriver, remove two screws holding element to oven wall. 4.Separate element from wiring by simply pulling the wires with "push- on" connections from element. 5.Reverse process to install new element.
2 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
mark from Traverse City, MI
Parts Used:
316075103, 316490000
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
f10 when we used oven
pulled stove out, remove power cord from wall,remove back and replace parts .
2 of 4 people found this instruction helpful.
Were these instructions helpful?
Customer:
Diana from Corpus Christi, TX
Parts Used:
316075103
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Bake element not heating.
Instruction video very helpful but we did need to buy different terminals as the ones on our oven were a little different. after replacing the terminals everything else was just like the video.
1 person found this instruction helpful.
Were these instructions helpful?

Customer Reviews

Average Rating (1 Reviews):
5
out of 5
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

Fix Number: FIX438018
Manufacturer Part Number: 316075103
Brand
Model Number
Description
Tappan
30TESKWED-04-23
Range - Electric
Tappan
30TESKWED-23
Range - Electric
Tappan
30TESKWED-23-02
Range - Electric
Tappan
30TESKWED-23-03
Range - Electric
Tappan
30TESKWED1
Range - Electric
Tappan
30TESKWED2
Range - Electric
Tappan
30TESKWED3
Range - Electric
Tappan
30TESKWED4
Range - Electric
Tappan
31-1049-00-01
Range - Electric
Tappan
31-1049-00-02
Range - Electric
Tappan
31-1049-00-03
Range - Electric
Tappan
31-1049-00-04
Range - Electric
Tappan
31-1049-00-05
Range - Electric
Tappan
31-1049-00-06
Range - Electric
Tappan
31-1049-23-01
Range - Electric
Tappan
31-1049-23-02
Range - Electric
Tappan
31-1049-23-03
Range - Electric
Tappan
31-1049-23-04
Range - Electric
Tappan
31-1049-23-05
Range - Electric
Tappan
31-1049-23-06
Range - Electric
Tappan
31-2232-00-01
Range - Free Standing, Electric
Tappan
31-2232-00-02
Range - Free Standing, Electric
Tappan
31-2232-00-03
Range - Free Standing, Electric
Tappan
31-2232-23-01
Range - Electric
Tappan
31-2232-23-02
Range - Free Standing, Electric
Tappan
31-2232-23-03
Range - Free Standing, Electric
Tappan
31-2239-00-01
Range - Free Standing, Electric
Tappan
31-2239-00-02
Range - Free Standing, Electric
Tappan
31-2239-00-03
Range - Free Standing, Electric
Tappan
31-2239-00-04
Range - Free Standing, Electric