GE/GE_Thumb/00006152i01.gif
See part 650 in the diagram
( Grid squares measure 1x1 inch )

Bake Element - 220V 2300W

★★★★★
★★★★★
1 Review
$ 41.48   In Stock
Fix Number: FIX249466
Manufacturer #: WB44X5082
Manufactured by: GE

Product Description

This closed, hinged style bottom bake element with screw in terminals is 15-1/4" long and 18-1/4" wide. The depth of the terminals is 2-1/2".

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 37 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Craig from Lititz, PA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Old element had a weak spot and the it burned up and separated into two parts
I first turned of the breaker to the range. The clock on the range was off telling me the stove breaker was safely off. I opened the cardboard box and removed the new element from the plastic it was wrapped in. I used a nut driver to remove the two screws holding the silver plate onto the stove. Once that was off, I found that there were two slot head screws connecting the old element to the wires coming from inside the stove. I removed both screws and removed the element from the stove. The new element was installed using the reverse process except that instead of using the old screws for the wires, I used the new screws that came with the new element. I used the old screws for the plate with the nut driver. I turned the breaker back on and noted the clock was now working again. I turned on the stove to see the element heat up. A small amount of smoke and oder burns off the new element which is normal. I turned off the stove after perhaps 1 minute. From start to finish, this entire process took less than ten (10) minutes. This is a VERY easy repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Jennifer from Kingsland, TX
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
lower oven element burned up
Used a nut driver to unscrew old element from the interior from the oven wall. Pulled the old element forward and used the same nut driver to remove it from elect posts. Used same nut driver to install new element in exactly the same way I took the old one off. Works like a charm. Easy breezy. I once had an appliance repairman replace the upper element. It cost me as much money to have it repair as I paid for the stove brand new. This cost me approx. $39.00. Good deal, so easy a kid could do it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Harry from Winchester, MA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Bake element (lower) in oven had burnt out.
Repair went pretty much as others have described. One caveat: the electrical connection to the old element used self tapping screws while the new element had machined threads. I tried to re-use the old screws and it took me a few minutes to realize why they weren't threading in. Always use the screws that come with the new element to make the connection. Also, to remove the fasteners used to secure the element to the back of the oven it helps immensely if you use a 12-15" extension with the (1/4" ) socket unless you have really, really long arms!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Stephen from Davie, FL
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Element not fully heating
Removed 4 screws and old element. Installed new one. Simple. Remember to flip the circuit breaker first.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Tom from Kimberly, ID
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
heating element had reached end of life
DISCONNECT POWER SUPPLY. REMOVE PROTECTIVE SHIELD ON BACK OF RANGE. REMOVE 2 SCREWS ATTACHED TO ELEMENT POSTS. OPEN OVEN DOOR REMOVE 2 SCREWS FROM ELEMENT HOLDING PLATE. REPLACE OLD ELEMENT WITH NEW AND PUT EVERYTHING BACK IN REVERSE AND IT'S DONE
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    John from Tucson, AZ
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Failed bake element
Replaced bake element.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kevin from Oakley, CA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Element quit working
Remove 2 screws that hold element to rear oven wall pull forward to expose wire connections remove fasteners that secure wires to element reassemble take note to not let wires retract back into the oven wall other wise easy peasy
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    eric from Edmonds, WA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Burned out element
Remove oven door (lift off the hinges). Unscrew two screws that hold the little back plate to the oven wall. Pull element out a couple inches and remove the two wires fastened with small screws. Attach wires to new element. Reattach back plate to back wall. Put the door back on. Finished! Total time approximately 10 minutes.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bill from Bellevue, WA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Bake element burned out
1. Turn off power; 2. Removed four screws (2 on bracket and 2 holding power wires); 3. Replaced four screws on new bake element in opposite order they were removed from old element; 4. Turn on power. Ta Da!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Donald from Ephrata, PA
  • Parts Used:
    WB44X5082
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Bake Element burned out
Removed 2 screws on back of oven and removed 2 screws from the element. Reversed to repair.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX249466
      Manufacturer Part Number: WB44X5082
      Brand
      Model Number
      Description
      Kenmore
      20221
      Range - Kenmore Range/Stove/Oven Model 20221 (1988) (20221(1988)) Parts
      Kenmore
      20231
      Range - Kenmore Range/Stove/Oven Model 20231(1988) Parts
      Kenmore
      20232
      Range - Kenmore Range/Stove/Oven Model 20232(1988) Parts
      Kenmore
      20233
      Range - Kenmore Range/Stove/Oven Model 202.33 (20233, 202 33) Parts
      Kenmore
      3639308810
      Range
      Kenmore
      3639378810
      Range
      Kenmore
      3639378880
      Range
      Kenmore
      3639858810
      Range
      Kenmore
      3639858911
      Range
      Kenmore
      3639868810
      Range
      Kenmore
      3639878810
      Microwave Oven Combo
      Kenmore
      3639878911
      Microwave Oven Combo
      Kenmore
      3639888810
      Microwave Oven Combo
      Hotpoint
      9878810
      Range - Hotpoint Range/Stove/Oven Model 9878810 Parts
      Hotpoint
      9888810
      Range - Hotpoint Range/Stove/Oven Model 9888810 Parts
      Kenmore
      99121-8
      Range - Kenmore Range/Stove/Oven Model 99121-8(1988) (991218(1988), 99121 8(1988)) Parts
      Kenmore
      99138
      Range - Kenmore Range/Stove/Oven Model 99138 (1988) (99138(1988)) Parts
      Kenmore
      99141
      Range - Kenmore Range/Stove/Oven Model 99141 (1988) (99141(1988)) Parts
      Kenmore
      99148
      Range - Kenmore Range/Stove/Oven Model 99148 (1988) (99148(1988)) Parts
      Kenmore
      99151
      Range - Kenmore Range/Stove/Oven Model 99151 (1988) (99151(1988)) Parts
      Kenmore
      99158
      Range - Kenmore Range/Stove/Oven Model 99158 (1988) (99158(1988)) Parts
      Kenmore
      99211
      Range - Kenmore Range/Stove/Oven Model 99211 (1988) (99211(1988)) Parts
      Kenmore
      99221
      Range - Kenmore Range/Stove/Oven Model 99221 (1988) (99221(1988)) Parts
      Kenmore
      99228
      Range - Kenmore Range/Stove/Oven Model 99228 (1988) (99228(1988)) Parts
      Kenmore
      99241
      Range - Kenmore Range/Stove/Oven Model 99241 (1988) (99241(1988)) Parts
      Kenmore
      99248
      Range - Kenmore Range/Stove/Oven Model 99248 (1988) (99248(1988)) Parts
      Kenmore
      99258
      Range - Kenmore Range/Stove/Oven Model 99258 (1988) (99258(1988)) Parts
      Kenmore
      99351
      Range - Kenmore Range/Stove/Oven Model 99351 (1988) (99351(1988)) Parts
      General Electric
      BP76GS1
      Range - GE Range/Stove/Oven Model BP76GS1 Parts
      General Electric
      J300*R1
      Range - GE Range/Stove/Oven Model J300*R1 Parts