Dryer Hardware

Shop By Brand

Popular Dryer Hardware

$13.44
In Stock
Roller Support Tri-Ring
Fix Number FIX11755850
Manufacturer Part Number WPW10512946
This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.
Fixes these symptoms
$40.60
In Stock
Igniter Kit
★★★★★
★★★★★
(1)
Fix Number FIX334180
Manufacturer Part Number 279311
This is a genuine OEM replacement igniter kit for your gas-heated clothes dryer. The silicon carbide igniter is used to light the gas that creates the heat in order to dry your clothes. If your dryer is not heating, takes a long time to dry clothes, or has low heat you may want to consider replacing your igniter. This kit can be used to replace both round and flat igniters, and comes with a 3-inch flat igniter, bracket, 4-inch wire lead, and the plug. Before beginning this repair, please ensure that the power and gas is disconnected from the range. As the igniter is located within the burner assembly, you will need a variety of tools to complete the installation. These tools include a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet. This part should be handled with care, as the igniter is very fragile.
Fixes these symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Will Not Start
  • See more...
$6.68
In Stock
D-Shaped Knob Clip
Fix Number FIX268493
Manufacturer Part Number WH01X10106
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is a genuine OEM part that is made of metal, designed to fit onto a D-shaped shaft, and is sold individually. If the control knob has become loose, or it is difficult to select settings, the clip may need to be replaced. Needle nose pliers may be required to either remove the clip from the shaft, or to pull it out of the knob. The new clip can simply be inserted into the control knob.
Fixes these symptoms
  • Shuts off too soon
  • Timer will not advance
  • Will not shut off
  • See more...
$12.76
In Stock
Screw
Fix Number FIX11757021
Manufacturer Part Number WPW10661886
This authentic OEM part is a mounting screw for the door handle on your refrigerator. If the door handle is loose or you are having issues opening or closing the door, a new mounting screw may solve these issues. Please note that the screw is sold individually, so if you need to replace more than one you will need to order the appropriate quantity.
$6.92
In Stock
Retaining Ring
Fix Number FIX11746909
Manufacturer Part Number WP9703438
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.
Fixes these symptoms
  • No heat or not enough heat
  • Noisy
  • Takes too long to dry
  • See more...
$8.63
In Stock
Lid Bumper
Fix Number FIX284979
Manufacturer Part Number WR02X10540
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor from scraping against the side bracket in the evaporator fan motor assembly. You can find the bumper behind the evaporator fan cover in the freezer. If your fridge or freezer is noisy, it is likely that the bumper has worn down and will need to be replaced.
Fixes these symptoms
$7.76
In Stock
Thrust Washer
Fix Number FIX11740482
Manufacturer Part Number WP233520
This washer is 3/4 inches in diameter.
Fixes these symptoms
  • Burning smell
  • Noisy
  • Pumps but will not spin
  • See more...
$13.35
In Stock
Idler Pulley Shaft Washer
★★★★★
★★★★★
(1)
Fix Number FIX11757538
Manufacturer Part Number WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
Fixes these symptoms
$7.76
In Stock
Hose Clamp
Fix Number FIX11743008
Manufacturer Part Number WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Fixes these symptoms
$7.76
In Stock
Screw, 8/18 x 3/8
Fix Number FIX11746840
Manufacturer Part Number WP90767
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

Brands