International Dryer Hardware

Retaining Ring Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.

Drum Roller Shaft Washer This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

Idler Pulley Shaft Washer

★★★★★

★★★★★

1 Review

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.

Screw, 8/18 x 3/8 This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

Spring Retaining Clip This front cover spring retaining clip is not quite an inch long. It is made entirely of metal and is used for some washing machines.

Blower Wheel Clamp This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.

Idler Shaft Retaining Ring This idler shaft retaining ring is well under an inch long and is made of metal.

Roller Shaft Hex Nut This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

Screw Sold Individually.

Idler Bracket Spacer