KitchenAid Dryer Hardware
Start With Your Model Number
Find Parts Fast Guaranteed Fit Repair VideosNeed help finding your model number?
Popular KitchenAid Dryer Hardware
Roller Support Tri-Ring
Fix Number FIX11755850
Manufacturer Part Number WPW10512946This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.
Fix Number FIX334180
Manufacturer Part Number 279311This is a genuine OEM replacement igniter kit for your gas-heated clothes dryer. The silicon carbide igniter is used to light the gas that creates the heat in order to dry your clothes. If your dryer is not heating, takes a long time to dry clothes, or has low heat you may want to consider replacing your igniter. This kit can be used to replace both round and flat igniters, and comes with a 3-inch flat igniter, bracket, 4-inch wire lead, and the plug. Before beginning this repair, please ensure that the power and gas is disconnected from the range. As the igniter is located within the burner assembly, you will need a variety of tools to complete the installation. These tools include a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet. This part should be handled with care, as the igniter is very fragile.
Single Front Panel Cip
Fix Number FIX11731288
Manufacturer Part Number W10854425This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Fix Number FIX11740482
Manufacturer Part Number WP233520This washer is 3/4 inches in diameter.
Fixes these symptoms
- Burning smell
- Spins slowly
- See more...
Screw - 10-16 x 1
Fix Number FIX11741409
Manufacturer Part Number WP3387230This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer manual. *Please note: this screw is sold separately.
Fix Number FIX11740701
Manufacturer Part Number WP308685This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers, cooktops, trash compactors, grills, and ice makers. *Please note: This part is sold individually.
Screw, 8/18 x 3/8
Fix Number FIX11746840
Manufacturer Part Number WP90767This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
Fix Number FIX11742721
Manufacturer Part Number WP488729Metallic screw that is less than an inch long. Does not include the plastic washer.
Single Access Panel Spring Retainer/Clip
Fix Number FIX11741425
Manufacturer Part Number WP3388229Sold Individually.
Fixes these symptoms
- Door won’t close
- See more...
Support Roller Clip
Fix Number FIX11746832
Manufacturer Part Number WP90296Sold Individually.