Official Crosley Dryer Hardware

$13.44

Roller Support Tri-Ring

Fix Number FIX11755850

Manufacturer Part Number WPW10512946

This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.

Fixes these symptoms

Noisy
Will not tumble
See more...

$40.60

Igniter Kit

★★★★★

(1)

Fix Number FIX334180

Manufacturer Part Number 279311

This is a genuine OEM replacement igniter kit for your gas-heated clothes dryer. The silicon carbide igniter is used to light the gas that creates the heat in order to dry your clothes. If your dryer is not heating, takes a long time to dry clothes, or has low heat you may want to consider replacing your igniter. This kit can be used to replace both round and flat igniters, and comes with a 3-inch flat igniter, bracket, 4-inch wire lead, and the plug. Before beginning this repair, please ensure that the power and gas is disconnected from the range. As the igniter is located within the burner assembly, you will need a variety of tools to complete the installation. These tools include a putty knife, a small flat blade screwdriver, a 5/16 nut driver, and a 5/16 socket with a ratchet. This part should be handled with care, as the igniter is very fragile.

Fixes these symptoms

No heat or not enough heat
Takes too long to dry
Will Not Start
See more...

$6.92

Retaining Ring

Fix Number FIX11746909

Manufacturer Part Number WP9703438

Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.

Fixes these symptoms

No heat or not enough heat
Noisy
Takes too long to dry
See more...

$7.76

Thrust Washer

Fix Number FIX11740482

Manufacturer Part Number WP233520

This washer is 3/4 inches in diameter.

Fixes these symptoms

Burning smell
Noisy
Pumps but will not spin
See more...

$13.35

Idler Pulley Shaft Washer

★★★★★

(1)

Fix Number FIX11757538

Manufacturer Part Number WPY312527

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.

Fixes these symptoms

Noisy
Will not tumble
See more...

$7.76

Screw, 8/18 x 3/8

Fix Number FIX11746840

Manufacturer Part Number WP90767

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

$12.90

Single Front Panel Cip

Fix Number FIX11731288

Manufacturer Part Number W10854425

This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.

Fixes these symptoms

Noisy
See more...

$7.76

Screw - 10-16 x 1

Fix Number FIX11741409

Manufacturer Part Number WP3387230

This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer manual. *Please note: this screw is sold separately.

$13.36

Drum Roller Shaft Washer

Fix Number FIX11740748

Manufacturer Part Number WP312535

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

Fixes these symptoms

Noisy
Will not tumble
See more...

$24.35

Screw

Fix Number FIX417463

Manufacturer Part Number 131302800

This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.

Crosley Dryer Hardware

Popular Crosley Dryer Hardware

Related Parts

Crosley Dryer Hardware

Start With Your Model Number

Popular Crosley Dryer Hardware

Related Parts