Official Crosley Dryer Valves

M Series New Style Coil Kit

$28.91

Fix Number: FIX334310
Manufacturer Part Number: 279834

This OEM kit comes with two ignition coils (one three-terminal boost/hold coil, and one two-terminal secondary coil). Usually only one of them burns out, but you should replace them as a set as both have to be operational for the gas valve to open. The primary purpose of the part is to open the gas valve and allow the gas to enter the burner. This is a safety mechanism to make sure that there is never an unsafe buildup of gas inside the appliance. You will find the coils attached to the dryer gas valve. This is not an uncommon repair; it can fail due to normal material fatigue over time. To test your current parts, watch the burner, and if the igniter glows for a while and then shuts off without the gas is igniting, it usually means one of these coils is bad.

Fixes these symptoms

Noisy
Not Heating
See more...

Liquid Propane Gas Converter

$59.43

★★★★★

1 Review

Fix Number: FIX16875225
Manufacturer Part Number: W11581317

Converts natural gas burners to liquid propane.

Liquid Propane Conversion Kit

$34.27

Fix Number: FIX3493998
Manufacturer Part Number: 49572A

This part converts your appliance from Natural Gas to Liquid Propane.

Valve Coil

$65.80

Fix Number: FIX11752967
Manufacturer Part Number: WPW10328463

Dryer Burner Tube

$88.90

Fix Number: FIX11743780
Manufacturer Part Number: WP693140

Includes hood.

Gas Valve with Coils

$239.20

Fix Number: FIX11740673
Manufacturer Part Number: WP306176

This valve comes with electrical solenoids/coils.

Burner Tube

$112.41

Fix Number: FIX11741124
Manufacturer Part Number: WP33002793

This gas dryer burner assembly mixes air and gas to produce a steady flame that heats the dryer drum efficiently. It is essential for proper drying performance and can help resolve issues such as no heat, inconsistent heat, or long drying times caused by rusted or clogged burners. Often called a burner tube or burner tube assembly, it should be installed with the dryer unplugged and the gas supply turned off.