Official Crosley Dryer Belts

Multi Rib Belt - 92-1/4"

$17.17

Fix Number: FIX346995
Manufacturer Part Number: 341241

This multi rib belt is an OEM replacement part for a dryer. It attaches to the drum, idler pulley, and motor pulley, and is responsible for spinning the drum. Over time, the belt can become frayed, brittle, and inflexible. If you can hear the motor running, but the drum does not turn, it is likely that the belt is broken. Other symptoms of a broken multi rib belt include unusual noises, failing to start, no heat, a burning smell, and an unresponsive touchpad. Depending on the model, you will find the belt by looking behind the front panel or under the main top of the dryer. This belt is 1/4-inches wide, has a length of 92-1/4-inches, and has four ridges and three groves on the belt. Each belt is sold separately.

Fixes these symptoms

Drum Not Spinning
Heat stays on after drum has stopped
Noisy
See more...

Watch the install video

Dryer Repair Kit

$53.54

★★★★★

5 Reviews

Fix Number: FIX373088
Manufacturer Part Number: 4392067

This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Watch the install video

Drum Belt

$6.89

Fix Number: FIX1148434
Manufacturer Part Number: 134503600

The drum belt, also known as a drive belt, is a rubber piece that wraps around the dryer drum, idler pulley, and motor pulley and is used to make the drum rotate. If you can hear the motor running, but the drum is not spinning, it may be an issue with the drum belt. Since it is made of rubber, it can become brittle with age causing it to break. Alternatively, it could be stretched out and no longer gripping to the dryer drum. Both of these issues would require you to replace the belt. To do this repair you will need a putty knife to pop open the top and front panel of your dryer, and a Phillip head screwdriver. Be sure to disconnect the power to your appliance before beginning your repair. This drum belt measures 88 and 3/4 inches long by 1/4 inch wide. As it is a genuine OEM part, this size will be compatible with your appliance model.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Watch the install video

Multi Rib Belt

$21.93

Fix Number: FIX382430
Manufacturer Part Number: 661570

This is a single dryer drum belt that measures 93.5 inches. The belt rotates the dryer drum and is a common wear part that can become brittle over time. It can also stretch and change shape, so keep this in mind when comparing your old part to this new replacement part. When this part wears it can cause a thumping noise in your dryer, and that is a typical sign that it needs to be replaced. To access this part, you will need to remove the front panel of your dryer, and the belt will be found looped around the drummer, under the idler pulley wheel, and around the drive pulley. For a successful repair, you will need a pair of needle nose pliers, a Phillips screwdriver, a 1/4-inch nut driver, and a putty knife. Do not forget to disconnect the power to your appliance before you begin.

Fixes these symptoms

Drum Not Spinning
Noisy
Won’t Start
See more...

Watch the install video

Multi Rib Belt

$9.43

★★★★★

8 Reviews

Fix Number: FIX11742271
Manufacturer Part Number: WP40111201

The multi rib belt, which may also be called a dryer drum belt or a multi-v belt, helps to rotate the drum of the dryer. The belt wraps completely around the drum, around a tension pulley, and then around the drive motor pulley. As the motor spins it pulls the belt which in turns causes the drum to rotate. If the dryer is making a screeching noise while running, gives off a burning smell, or you can hear the motor running but the drum is not tumbling, it is likely time to replace the belt. If the belt is snapped or has been stretched out it will not be able to grip to the drum to spin it. Replacing the drum requires use of a putty knife and nut driver. This is a genuine OEM part that measures 93-3/8 inches in length and 3/8 of an inch wide. It is made of durable black rubber, is flat on one side with has five ridges on the other. The ridged side is what lays against the drum to provide the grip for tumbling. Please remember to disconnect your power supply to the appliance before beginning your repair.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Multi Rib Belt - 91-5/8 Inches

$22.89

★★★★★

2 Reviews

Fix Number: FIX11741110
Manufacturer Part Number: WP33002535

If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. This genuine OEM multi rib dryer drum belt measures approximately 91 and 5/8-inch in length and is 3/8-inch wide. It is made of black rubber and have five ridges, helping it to grip to your dryer drum.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Belt

$48.89

Fix Number: FIX2349294
Manufacturer Part Number: 134719300

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Drive Belt

$33.52

Fix Number: FIX11748749
Manufacturer Part Number: WPW10131172

This drive belt is genuine OEM part for your dryer. The belt works with the idler pulley to spin the dryer by driving the drum, and can become worn or break over time. To complete this repair, you will need a screwdriver, putty knife, and socket or nut driver. Accessing the belt involves disassembling the front panel of the dryer. Make sure your new belt is not twisted when installing it on the drum.

Fixes these symptoms