Whirlpool Washer Hardware

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Whirlpool Appliance Parts
Shop By Part Type

Popular Whirlpool Washer Hardware

Watch the install video
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
$11.50
In Stock
Fix Number
FIX11755850
Manufacturer Part Number
WPW10512946
This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenly distributing pressure. The part is triangular in shape, and less than an inch in size. Overtime it can become brittle or compressed, which can lead to a noisy tumbling cycle, or your dryer not tumbling at all. The tri-ring itself is simple to replace, simply slip off the damaged one and slip on the new. However, to access the drum roller or idler pulley, you will need to remove the front panel and drum of your dryer. This may require tools like a Phillips screwdriver, a quarter inch nut driver, putty knife, a small flat blade screwdriver, and a pair of needle nose pliers depending on your model. Ensure that the power is disconnected before beginning your repair.
Fixes these symptoms
Watch the install video
Agitator Bolt – Part Number: WP358237
Agitator Bolt
$6.25
In Stock
Fix Number
FIX11741866
Manufacturer Part Number
WP358237
This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the screw head is 7/16 inch, so you will need the appropriately sized socket to complete this repair. The new bolt comes with a rubber gasket and a threaded sealant.
Fixes these symptoms
  • Leaking
  • Marks left on clothes
  • Spinning Issues
  • See more...
Washer Washplate Screw – Part Number: W10752187
Washer Washplate Screw
$7.30
In Stock
Fix Number
FIX10064547
Manufacturer Part Number
W10752187
Fixes these symptoms
Single Front Panel Cip – Part Number: W10854425
Single Front Panel Cip
$15.70
In Stock
Fix Number
FIX11731288
Manufacturer Part Number
W10854425
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel on to the dryer. If the clip is damaged or missing, or if the front panel appears loose, you may need to replace the clip. This part is sold individually and is an authentic OEM part.
Fixes these symptoms
Boot Seal Retaining Ring – Part Number: W11266654
Boot Seal Retaining Ring
$26.73
In Stock
Fix Number
FIX12584490
Manufacturer Part Number
W11266654
Fixes these symptoms
Microwave Top Mounting Screw – Part Number: WP8169704
Microwave Top Mounting Screw
$8.35
In Stock
Fix Number
FIX11744892
Manufacturer Part Number
WP8169704
This screw is sold individually.
Watch the install video
Washer Washer – Part Number: WP3949550
Washer Washer
$12.55
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11742027
Manufacturer Part Number
WP3949550
This part goes on the agitator retaining bolt.
Fixes these symptoms
Washplate Bolt – Part Number: W10772621
Washplate Bolt
$6.25
In Stock
Fix Number
FIX10067065
Manufacturer Part Number
W10772621
Sold individually.
Fixes these symptoms
Washer Door Boot Spring Clamp – Part Number: W11218344
Washer Door Boot Spring Clamp
$26.73
In Stock
Fix Number
FIX12349413
Manufacturer Part Number
W11218344
The door boot spring clamp holds the door boot in place.
Fixes these symptoms
Watch the install video
Suspension Spring Retainer – Part Number: WPW10145155
Suspension Spring Retainer
$6.25
In Stock
Fix Number
FIX11749057
Manufacturer Part Number
WPW10145155
This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Fixes these symptoms

Related Whirlpool Washer Parts