Whirlpool Washer Agitators

Start With Your Model Number

Find Parts Fast Guaranteed Fit Repair Videos
Need help finding your model number?
Whirlpool Appliance Parts
Shop By Part Type

Popular Whirlpool Washer Agitators

Watch the install video
Agitator Directional Cogs – Part Number: 80040
$4.39
In Stock
Agitator Directional Cogs
★★★★★
★★★★★
19 Reviews
Fix Number FIX388034
Manufacturer Part Number 80040
Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing all 4 directional cogs at the same time. The agitator directional cogs reach across the gear teeth in one direction and dig into the gear teeth in the other direction to create the needed agitation. This thrusting motion is what tumbles your clothes during the wash cycle. When the teeth on the outer edge are damaged, the cogs will not engage with the upper agitator, making it impossible to agitate as it should. If your machine makes unusual noises, shakes/moves while operating, or will not spin or drain properly, it may be time to replace them. To access this part, simply remove the softener dispenser and then the agitator cap. You will find them attached to the agitator. Each cog is approximately 1 inch long and made of a durable plastic.
Fixes these symptoms
  • Does not dispense fabric softener or detergent
  • Marks left on clothes
  • Not cleaning dishes properly
  • See more...
Watch the install video
Agitator Repair Kit – Part Number: 285811
$24.72
In Stock
Agitator Repair Kit
★★★★★
★★★★★
10 Reviews
Fix Number FIX334650
Manufacturer Part Number 285811
This is an OEM agitator repair kit that includes an agitator cam, four directional cogs, a bearing, thrust spacer, inner cap seal, and washer. These parts are found inside the agitator auger near the top. This kit is used when the top portion of the agitator is not moving correctly but the bottom part is. The agitator is subjected to a lot of force during the wash cycle, so it is common for this part to wear over time, especially if you are consistently over-loading your washer. If your model has a softener dispenser, it will need to be removed to perform this repair. Agitator grease is recommended for this repair, but is not included in this kit.
Fixes these symptoms
  • Does not dispense fabric softener or detergent
  • Leaking
  • Marks left on clothes
  • See more...
Watch the install video
Agitator Cam Kit – Part Number: 285809
$16.36
In Stock
Agitator Cam Kit
Fix Number FIX334648
Manufacturer Part Number 285809
This is an authentic OEM agitator cam kit for your washing machine. The kit includes a bearing, the cam holder, and four individual cams. You may need to replace the agitator cam if you find your washer is noisy, it shakes and moves, or it will not agitate. To do this repair we find it easiest to remove the agitator and you will need a 7/16 socket to do this. Once the agitator has been removed from the washer, you can remove the old cam kit from the top portion. The four individual cams are inserted into the cam holder, and the bearing holds them all in place. The assembly can be placed back inside the agitator, and then the agitator installed back inside the washer.
Fixes these symptoms
Watch the install video
Thrust Spacer – Part Number: 285587
$7.64
In Stock
Thrust Spacer
★★★★★
★★★★★
1 Review
Fix Number FIX334562
Manufacturer Part Number 285587
The thrust spacer is a genuine OEM part that is more commonly known as a retainer ring. The spacer is made of white plastic and measures approximately 2.5 inches in diameter. This part is found in between the agitator and the auger in your direct drive washing machine. The space is used to support the auger and secure it on the agitator base. If your washer will not agitate, or is shaking or excessively noisy while running, you may need to replace the ring. Please note that this repair requires dual-action agitator grease, which is not included with this part.
Fixes these symptoms
Washing Machine Upper Agitator – Part Number: W10836692
$91.26
In Stock
Washing Machine Upper Agitator
Fix Number FIX11727882
Manufacturer Part Number W10836692
This agitator is for washers. Agitator rotates back and forth to move the clothes inside the tub to clean the load. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Watch the install video
Agitator Repair Kit – Part Number: 285748
$36.48
In Stock
Agitator Repair Kit
★★★★★
★★★★★
1 Review
Fix Number FIX334622
Manufacturer Part Number 285748
This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.
Fixes these symptoms
Watch the install video
Washer Agitator – Part Number: WP3951744
$147.54
In Stock
Washer Agitator
★★★★★
★★★★★
1 Review
Fix Number FIX11742049
Manufacturer Part Number WP3951744
This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.
Fixes these symptoms
Agitator Kit – Part Number: 285565
$195.98
In Stock
Agitator Kit
★★★★★
★★★★★
1 Review
Fix Number FIX334557
Manufacturer Part Number 285565
This kit does NOT include the fabric softener dispenser (part 8575076A). That must be ordered separately.
Fixes these symptoms
AGITATOR – Part Number: W10908289
$86.17
In Stock
AGITATOR
★★★★★
★★★★★
1 Review
Fix Number FIX11765867
Manufacturer Part Number W10908289
Fixes these symptoms
Agitator Cam Kit – Part Number: 285751
$15.10
In Stock
Agitator Cam Kit
Fix Number FIX334624
Manufacturer Part Number 285751
This agitator cam kit contains an almost three inch white retainer and four agitator dog ears. This kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover).
Fixes these symptoms

Related Parts