Washer Springs and Shock Absorbers

Shop By Brand

Popular Washer Springs and Shock Absorbers

$4.80
  In Stock
Suspension Spring
Fix Number FIX11743345
Manufacturer Part Number WP63907
This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub steady during loads that could cause an unbalance. If this part breaks, is worn down, or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. This part is approximately 2 inches in length when compressed, made of durable metal, and is sold individually. For this repair, you will need a 1/4 nut driver, putty knife, flat blade screwdriver, and a pair of needle-nose pliers. Before you begin, disconnect the power, fill hoses, and drain hose to give you easy and safe access (drain hose may release some water, have a small container or towel near by). Your appliance contains 3 suspension springs, so keep this in mind if you need to order multiple of this part. We suggest you purchase several at a time, as they can be very useful to have on-hand.
Fixes these symptoms
$8.89
  In Stock
Tub Dampening Strap
Fix Number FIX271100
Manufacturer Part Number WH1X2727
This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by keeping it centered in the cabinet. If you notice loud banging or excessive vibration, this could be due to an off-balanced tub caused by a worn or damaged tub dampening strap. While inspecting this part, also check that the tub itself is not damaged where the straps mount. This manufacturer-approved replacement part is black in color and measures 5.875-inches by 0.625-inches.
Fixes these symptoms
$57.27
  In Stock
Washing Machine Suspension Rod Kit
★★★★★
★★★★★
(3)
Fix Number FIX11703290
Manufacturer Part Number W10780048
The suspension rods help to keep the tub in your washing machine stable and secure while cycling through your laundry. If your washer is excessively vibrating, moving around, or very loud when operating, there may be an issue with your suspension. This authentic OEM replacement kit includes 4 rods, 4 suspension balls, and 4 bushings. The parts come assembled and ready to be installed. You will need to disconnect the power supply, water inlet and drain hoses from the washer before beginning this repair.
Fixes these symptoms
$7.48
  In Stock
Tub Spring
Fix Number FIX11751118
Manufacturer Part Number WPW10250667
This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.
Fixes these symptoms
$7.76
  In Stock
Suspension Spring
Fix Number FIX11738823
Manufacturer Part Number WP21001598
This suspension spring is used with many washing machines. It is made entirely of metal and is seven inches long.
Fixes these symptoms
$9.44
  In Stock
Suspension Rod Support
★★★★★
★★★★★
(1)
Fix Number FIX3502189
Manufacturer Part Number W10440729
If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that your washer runs smoothly. If the supports have become broken or damaged, it can cause the appliance to shake, move, and be noisy while running. This kit includes 8 suspension rod supports, comprised of two different types with 4 of each included in the set. These are genuine OEM replacement suspension rod supports, which are made of plastic and measure approximately 1.5 inches in diameter.
Fixes these symptoms
$9.92
  In Stock
Tub Centering Spring
Fix Number FIX3497596
Manufacturer Part Number W10400895
This tub centering spring is a genuine OEM replacement part for your washing machine. If your washer is noisy or excessively shaking while it is operating, you may need to replace the springs. The metal springs are used to reduce the shaking of the washer when the tub is agitating or spinning. Two springs are included with this kit.
Fixes these symptoms
$76.28
  In Stock
Shock Absorber Kit
Fix Number FIX3508101
Manufacturer Part Number 5304485917
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Fixes these symptoms
$55.97
  In Stock
Shock Absorber
Fix Number FIX11723173
Manufacturer Part Number W10822553
Sold individually. These shock absorbers keep the washer from vigorous shaking during its cycles. This shock absorber is for washers. Shock absorber absorbs the vibrations and movements of the outer washer tub. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
$15.50
  In Stock
Tub Wear Pads - Package of 3
Fix Number FIX334620
Manufacturer Part Number 285744
This package of pads contains three tub wear pads.
Fixes these symptoms

Brands