Hotpoint Washer Springs and Shock Absorbers

Tub Dampening Strap This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by keeping it centered in the cabinet. If you notice loud banging or excessive vibration, this could be due to an off-balanced tub caused by a worn or damaged tub dampening strap. While inspecting this part, also check that the tub itself is not damaged where the straps mount. This manufacturer-approved replacement part is black in color and measures 5.875-inches by 0.625-inches.

Front Suspension Rod & Spring Assembly - Blue Sold individually. This part is used to keep your tub upright and somewhat level during the different cycles.

Rod and Spring Assembly - White This part is used to keep your tub upright and somewhat level during the different cycles.

Rod and Spring Assembly - Green This part helps center and support the drum, transmission and motor assembly.

Socket Rod Support - White This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tub from shaking too much during operation. If your washer is shaking excessively or emitting an odd sound during use, it may be because the rod support is broken, and the suspension rod is not able to do its job. This part is made of white plastic and is sold individually.

Rear Suspension Rod & Spring Assembly - Red

Suspension Rod and Spring This part is the replacement suspension rod and spring assembly for your washer. The rod is approximately 27 inches long and is sold individually. The suspension rod and spring works something like a shock absorber and prevents the washer tub from shaking too much while the washer is operating. If you notice excessive shaking or vibrating, or if you notice a strange sound while the washer is running, you may need to replace the suspension rod and spring assembly. This is an OEM part sourced directly from the manufacturer.

Suspension Rod and Spring Assembly This part is the replacement suspension rod and spring assembly for your washer. The rod is approximately 27 inches long and is sold individually. The suspension rod and spring works something like a shock absorber and prevents the washer tub from shaking too much while the washer is operating. If you notice excessive shaking or vibrating, or if you notice a strange sound while the washer is running, you may need to replace the suspension rod and spring assembly. This is an OEM part sourced directly from the manufacturer.

BRACKET COUNTERWEIGHT

Friction Snubber Pad This friction snubber pad is an inch and a half long.