Hotpoint Washer Switches

Lid Switch with Wire Harness The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

SWITCH PRESSURE Also known as the Load Selector

Temperature Switch - 3 Position

★★★★★

★★★★★

1 Review

Also known as a Rotary Switch. This part regulates the temperature of the water in the tub.

Lid Switch Assembly The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.

Water Level Pressure Switch The water level pressure switch in your washing machine is a very important part, as it senses and regulates the water level within the washer. If you notice that the water level in your washing machine seems off, you may need to replace the water level pressure switch. Be sure to disconnect the power and water sources from your washing machine before you complete this repair.

Water Level Pressure Switch This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the correct water level has been reached.

Pressure Switch This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.

Lid Switch Actuator This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.

Lid Switch with Leads This kit comes with two butt connectors.

SWITCH PRESSURE