Official General Electric Washer Agitators

Agitator

$80.10

Fix Number: FIX16542670
Manufacturer Part Number: WH43X30957

This agitator assembly is designed for use in top-load washing machines, where it plays a crucial role in the cleaning process by rotating back and forth to help lift and move clothing through water and detergent. If your current agitator is cracked, worn, or no longer functioning properly, replacing it can restore your washer’s performance and ensure your laundry is thoroughly cleaned. Installation requires a wrench and should be done with the power and water supply turned off for safety. This component is sold individually and does not include additional parts or accessories.

Fixes these symptoms

Marks left on clothes
Spinning Issues
Will not agitate
See more...

AUGER

$55.18

Fix Number: FIX16226232
Manufacturer Part Number: WH43X31240

Located in the center of the washer tub, this white spiral auger helps move clothes through the water and detergent during each cycle. It lifts and drops garments to break up dirt and stains. If your washer is making strange noises, leaving clothes tangled, or not cleaning properly, the auger may be worn or damaged. Replacing it is a straightforward fix that can improve your washer’s performance. Be sure to disconnect power before starting the repair.

Fixes these symptoms

Spinning Issues
Will not agitate
See more...

AGITATOR BASE HYBRID ASSEMBLY

$54.12

Fix Number: FIX16743416
Manufacturer Part Number: WH43X34257

The agitator rotates back and forth to move the clothes inside the tub to clean the load.

Fixes these symptoms

Spinning Issues
Will not agitate
See more...

Watch the install video

Dual Action Agitator

$61.32

Fix Number: FIX1482519
Manufacturer Part Number: WH43X10034

This is an authentic agitator for your washer, responsible for moving clothes inside the tub. Please note, it does not come with the fabric dispenser, so you will need to either transfer the old one to your new agitator or order it separately. While troubleshooting and before ordering this part, we recommend also inspecting the condition of the agitator coupler. For this simple repair, remove the old agitator by pulling it upwards. If it is difficult to remove, try placing straps underneath to pull it out. Lower the new agitator down onto the coupler, making sure it is lined up properly, and then push down on it until it snaps into place.

Fixes these symptoms

Marks left on clothes
Spinning Issues
Will not agitate
See more...

IMPELLER/AUGER BASE

$57.30

★★★★★

1 Review

Fix Number: FIX16729545
Manufacturer Part Number: WH43X32857

This impeller sits at the bottom of the washer tub and helps move clothes through the water for better cleaning. It?s a common fix for poor wash results or noisy cycles. Be sure to unplug the washer and confirm compatibility before replacing.

Fixes these symptoms

Will not agitate
See more...

Watch the install video

Agitator Coupling Kit

$45.00

Fix Number: FIX1517844
Manufacturer Part Number: WH49X10042

This genuine OEM part is an agitator coupling kit for your washing machine. Also known as an agitator drive belt, this part is used to connect the transmission drive shaft to the base of the agitator. Over time, the teeth on the coupler will wear out and the part will need to be replaced. Signs that you will need to replace this part include your washing machine making a noisy grinding sound, the washer will not agitate or spin, and it excessively shakes or moves while running. This kit includes a coupler, gasket, and bolt. Please be sure to disconnect the power supply to your washer before beginning this repair.

Fixes these symptoms