GE/GE_Thumb/00110774i03.gif
See part 300 in the diagram
( Grid squares measure 1x1 inch )

Dual Action Agitator

$72.92
Fix Number: FIX1482519
Manufacturer #: WH43X10034
Manufactured by: GE

Product Description

This is an authentic agitator for your washer, responsible for moving clothes inside the tub. Please note, it does not come with the fabric dispenser, so you will need to either transfer the old one to your new agitator or order it separately. While troubleshooting and before ordering this part, we recommend also inspecting the condition of the agitator coupler. For this simple repair, remove the old agitator by pulling it upwards. If it is difficult to remove, try placing straps underneath to pull it out. Lower the new agitator down onto the coupler, making sure it is lined up properly, and then push down on it until it snaps into place.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.6 / 5.0, 14 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Richard from MINDEN, NE
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
agitator fins broke off,replaced agitator
removed idem replaced with same product...very simple
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    LEROY from OAK HILL, WV
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
paddles broke off
disconnect power , put rope under old agitator . wraped around 2x4 . push down until old agitator came off . installed new agitator by lining it up and pushing down.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Daniel from NEKOOSA, WI
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
agitator was cracked
Pulled cracked agitator out and snapped the new one in
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Fred from Las Vegas, NV
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
agitetor did'nt work
Easy
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    susan from Boise, ID
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Two of the action paddles broke off first one then a month later another
I didn't watch your video and thought there would be a nut on a shaft holding the agitator on. After drilling a hole in the top of the agitator and found only another plastic cover I went back to your site and found the video. Thanks. In the video it showed the technician pulling up and off the agitator. I am 5'3"tall but to short and to old and to week. I hurt my ribs bending over the machine. They still hurt and it has been over a week. When I need muscle my tall strong neighbor is always willing to help. He came and pulled that thing off in two seconds. I installed it after lining all the grooves up and it was just an easy bush down. Thanks you saved me hundreds of dollars because now I don't need to buy a new washer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Wilma from cordova, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
clothes got hang up in the agitator coupling in it broke into
took the old coupling off and put the new on pretty simple
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Clarence from West Jordan, UT
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
The top half of the agitator would not move during the agitation cycle.
Removed and replaced the old agitator as per the YOU TUBE video. No tools needed. Piece of cake.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Robert L from Brunswick, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was not agitating due to stripped plastic spine on agitator coupling.
removed agitator by lifting off coupling. use socket wrench to remove bolt from plastic coupling. remove old coupling. install new coupling. rebolt. reinstall agitator. very simple job. :-)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    LARRY from MILLERSBURG, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
AGITATOR COMING APART
PULLED THE AGITATOR OUT-TOOK OUT COUPLING-UNBOLTED IT WITH SOCKET SET
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kathleen from Pullman, MI
  • Parts Used:
    WH43X10034
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Had to replace the Agitator
I have never done anything like this before ever...So I watched the 2 minute How to Replace the Agitator Video on site...2 times. Very nice video... Just in case, I used a pillow to protect my face if the agitator popped up(nice warning on the how to video so I was prepared). I had to lean into the washer to reach the bottom of the agitator. But it came up pretty easy and the new one popped right on. Thank you so much for your help with this fix! A real big confidence builder for me!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX1482519
Manufacturer Part Number: WH43X10034
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
General Electric
56241B0WW
Washer
General Electric
56241B1WW
Washer
General Electric
56241B2WW
Washer
General Electric
56241B3WW
Washer
General Electric
56251B0WW
Washer
General Electric
56251B1WW
Washer
General Electric
56251B2WW
Washer
General Electric
56421D0WW
Washer
General Electric
56421D5WW
Washer
General Electric
56421DAWW
Washer
General Electric
57051A0WW
Washer
General Electric
57071A0WW
Washer
General Electric
57081A0WW
Washer
General Electric
57271B0WW
Washer
General Electric
57271B1WW
Washer
General Electric
57271B2WW
Washer
General Electric
57281B0WW
Washer
General Electric
57281B1WW
Washer
General Electric
57281B3WW
Washer
General Electric
57281B5WW
Washer
General Electric
57431D0WW
Washer
General Electric
57431D5WW
Washer
General Electric
57431DAWW
General Electric
57431DCWW