General Electric Washer Valves

General Electric Appliance Parts

Popular General Electric Washer Valves

Water Inlet Valve Assembly
$49.29
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12726769
Manufacturer Part Number
WH13X26535
This replacement water inlet valve ensures accurate control of hot and cold water entering your washing machine. It plays a key role in maintaining proper water levels for each cycle. If your washer won’t fill, leaks, or fills unexpectedly, the valve may need to be replaced. The assembly is gray, encased in plastic, and does not include a gasket. Installation requires basic tools and should be performed with the appliance unplugged and water supply turned off.
Fixes these symptoms
  • Leaking
  • No hot or cold water
  • Water Filling Issues
  • See more...
Water Inlet Valve Assembly
$50.36
In Stock
Fix Number
FIX12726768
Manufacturer Part Number
WH13X26534
If your washer isn’t filling up like it should, this water inlet valve might be the fix. It controls how warm and cold water enter the machine during a cycle. When it stops working, your washer might not fill at all—or only with one temperature. Swapping it out takes a few tools and a bit of disassembly, but it’s a solid way to get things running again. Just note: this valve is sold on its own, without any extra parts.
Fixes these symptoms
  • Leaking
  • No hot or cold water
  • Water Filling Issues
  • See more...
Water Inlet Valve Assembly
$64.74
In Stock
Fix Number
FIX12171559
Manufacturer Part Number
WH13X26637
This dual-valve inlet assembly is designed to control water flow into compatible washing machines during the wash cycle. Each valve operates independently via its own wire terminal, allowing precise regulation of water entry. A faulty inlet valve can prevent the washer from starting, trigger error messages, or cause unwanted water leakage into the tub—making prompt replacement essential. Installation requires partial disassembly of the appliance and basic tools such as a screwdriver, socket wrench, and needle-nose pliers. This component is provided as a standalone part and does not include additional accessories.
Fixes these symptoms
Valve Triple Water
$53.58
In Stock
Fix Number
FIX3652834
Manufacturer Part Number
WH13X10053
The purpose of the triple water valve is to properly fill your washer with water by controlling the hot and cold water going into the tub. If your washer is overfilling or not filling, you may need to replace this part. It is about 5.5 inches in total length. You will find your water inlet valve at the back of your washer.
Fixes these symptoms
  • Leaking
  • No hot or cold water
  • Water Filling Issues
  • See more...
Triple Water Valve
$57.30
On Order
Fix Number
FIX11721803
Manufacturer Part Number
WH13X23974
The triple water valve or inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.
Fixes these symptoms
  • Leaking
  • No hot or cold water
  • Water Filling Issues
  • See more...
WATER VALVE
$92.63
In Stock
Fix Number
FIX12743643
Manufacturer Part Number
WH23X29553
Fixes these symptoms
Fix Number
FIX1482392
Manufacturer Part Number
WH13X10029
This is the replacement water valve for your washer. It has 2 inlets and 3 outlets. The water valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washer continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your dishwasher. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
Triple Water Valve
$54.12
In Stock
Fix Number
FIX11701139
Manufacturer Part Number
WH13X22720
This triple water inlet valve controls the flow of hot, cold, and warm water into the washer. It helps ensure proper filling and temperature during each cycle. If your washer is leaking, filling slowly, or not getting the right water mix, this part may need replacing. Always unplug the appliance and shut off the water before installation, and confirm it fits your model.
Fixes these symptoms
Water Inlet Valve
$103.99
In Stock
Fix Number
FIX1019151
Manufacturer Part Number
WH13X10023
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Fixes these symptoms
Water Inlet Valve Assembly
$159.27
In Stock
Fix Number
FIX960664
Manufacturer Part Number
WH13X10017
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Fixes these symptoms

Related General Electric Washer Parts