General Electric Washer Drums and Tubs
Start With Your Model Number
Find Parts Fast Guaranteed Fit Repair VideosNeed help finding your model number?
Popular General Electric Washer Drums and Tubs
Drum Bearing Slide - White (Sold individually)
Fix Number FIX755842
Manufacturer Part Number WE1M504This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.
Drum Bearing Slide - Green (Sold individually)
Fix Number FIX6447706
Manufacturer Part Number WE1M1067This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front bearing. As the dryer rotates, the drum bearing slides help to support the front of the drum. If your appliance becomes noisy, is not drying properly, or leaves marks on clothes, it may be time to replace it. If you are replacing one slide, we recommend replacing the other slide at the same time, as they deteriorate at a similar rate. You will need to order 2 of these parts as there are 2 in each dryer. It is approximately 2.6-inches deep, 0.06-inches in height, and 0.5-inches wide. This part is denoted as being green in the title, however users and technicians have noted it is actually gray in color.
Drum Glide Bearing - White
Fix Number FIX4704230
Manufacturer Part Number WE3M51If your dryer is excessively noisy when operating, is not tumbling, or is leaving marks on your laundry, it may be time to replace the drum glides. The drum glide bearing is a genuine OEM part for your dryer and is used to help the drum rotate smoothly and quietly. If the bearing has worn out, it can make your dryer noisy when operating, with a metal-on-metal sound. Please be sure to disconnect the power supply to the dryer before beginning this repair.
Inner Tub Base Hub
Fix Number FIX273296
Manufacturer Part Number WH45X10027This part is the replacement inner tub base hub for your washer. It is made of metal and is approximately 15 inches in diameter. The inner tub base hub fits between the wash tub and the spin basket, and it holds the spin basket on the gear case shaft. The main reason you would want to replace the hub, is if the washer will not agitate, or if you notice excessive noise or shaking when the washer is in use. Be sure to disconnect the washer from the water and power sources before you begin this repair. This part is sold individually and is and OEM part from the manufacturer.
Fixes these symptoms
- Will not agitate
- See more...
Fix Number FIX3493690
Manufacturer Part Number WH45X10090
RING BALANCE Assembly
Fix Number FIX8757351
Manufacturer Part Number WH45X10138
COVER TUB Assembly
Fix Number FIX3652851
Manufacturer Part Number WH45X10134
Fix Number FIX273912
Manufacturer Part Number WH8X366