Official Maytag Washer Dryer Combo Belts

Dryer Repair Kit

$53.54

Fix Number: FIX373088
Manufacturer Part Number: 4392067

This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Watch the install video

Multi Rib Belt

$21.93

Fix Number: FIX382430
Manufacturer Part Number: 661570

This is a single dryer drum belt that measures 93.5 inches. The belt rotates the dryer drum and is a common wear part that can become brittle over time. It can also stretch and change shape, so keep this in mind when comparing your old part to this new replacement part. When this part wears it can cause a thumping noise in your dryer, and that is a typical sign that it needs to be replaced. To access this part, you will need to remove the front panel of your dryer, and the belt will be found looped around the drummer, under the idler pulley wheel, and around the drive pulley. For a successful repair, you will need a pair of needle nose pliers, a Phillips screwdriver, a 1/4-inch nut driver, and a putty knife. Do not forget to disconnect the power to your appliance before you begin.

Fixes these symptoms

Drum Not Spinning
Noisy
Won’t Start
See more...

Watch the install video

Tumbler and Motor Belt

$32.39

★★★★★

9 Reviews

Fix Number: FIX11757542
Manufacturer Part Number: WPY312959

This is a single OEM dryer drum belt. It measures 100 inches in length, 3/8 of an inch wide and has five ribs and four grooves. Keep in mind that this rubber drum belt will stretch over time, so if you are comparing your current belt to these specified measurements, they may not be exact. For this repair, you will need to disconnect the power, and remove the front panel and drum. You will need a 5/16 nut driver and a stubby Phillips screwdriver. While you are doing this repair, be careful not to let the belt fall into the groove in the drum, causing it to be too loose.

Fixes these symptoms

Drum Not Spinning
Marks left on clothes
Noisy
See more...

Watch the install video

Multi Rib Belt - 91-5/8 Inches

$28.34

★★★★★

2 Reviews

Fix Number: FIX11741110
Manufacturer Part Number: WP33002535

If your dryer is noisy while operating, or will not tumble at all, there may be an issue with the drum belt. Over time, the rubber can become brittle and snap, and the belt will need to be replaced. This genuine OEM multi rib dryer drum belt measures approximately 91 and 5/8-inch in length and is 3/8-inch wide. It is made of black rubber and have five ridges, helping it to grip to your dryer drum.

Fixes these symptoms

Drum Not Spinning
Noisy
See more...

Watch the install video

Belt Kit

$41.21

★★★★★

1 Review

Fix Number: FIX2005284
Manufacturer Part Number: 12112425

Over time, the belts in your washer can either stretch out and sag, or become brittle and snap. When this happens, it can result in the belt losing its grip and will not be able to spin or drain the tub. If this happens, the belts will need to be replaced. This OEM belt kit includes the drive belt and the pump belt, which are both V-shaped, and made of black rubber. The pump belt is located between the motor and pump under the washer, and the drive belt is looped around the drive and motor pulley at the bottom of the machine. This repair is easiest to complete if the washer is placed on its back, and you will need to disconnect the power and water supply.

Fixes these symptoms

Burning smell
Leaking
Noisy
See more...

Drive Belt

$33.52

Fix Number: FIX11748749
Manufacturer Part Number: WPW10131172

This drive belt is genuine OEM part for your dryer. The belt works with the idler pulley to spin the dryer by driving the drum, and can become worn or break over time. To complete this repair, you will need a screwdriver, putty knife, and socket or nut driver. Accessing the belt involves disassembling the front panel of the dryer. Make sure your new belt is not twisted when installing it on the drum.

Fixes these symptoms

Noisy
See more...

Watch the install video

Drive Belt and Motor Isolator Kit

$40.55

Fix Number: FIX2003327
Manufacturer Part Number: 12001788

This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.

Fixes these symptoms