Official Maytag Washer Dryer Combo Valves

M Series New Style Coil Kit

$30.89

Fix Number: FIX334310
Manufacturer Part Number: 279834

This OEM kit comes with two ignition coils (one three-terminal boost/hold coil, and one two-terminal secondary coil). Usually only one of them burns out, but you should replace them as a set as both have to be operational for the gas valve to open. The primary purpose of the part is to open the gas valve and allow the gas to enter the burner. This is a safety mechanism to make sure that there is never an unsafe buildup of gas inside the appliance. You will find the coils attached to the dryer gas valve. This is not an uncommon repair; it can fail due to normal material fatigue over time. To test your current parts, watch the burner, and if the igniter glows for a while and then shuts off without the gas is igniting, it usually means one of these coils is bad.

Fixes these symptoms

Noisy
Not Heating
See more...

Watch the install video

Water Inlet Valve

$98.44

Fix Number: FIX1583805
Manufacturer Part Number: 205613

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Watch the install video

Dual Cold Water Valve

$118.84

Fix Number: FIX11750469
Manufacturer Part Number: WPW10212596

Water inlet valve controls the water flow into the washer. Fits some washers in the following series: Kenmore 110; Whirlpool CHW, WFW and YWFW; Maytag CHW, MHN, MHP, MHWE, MHWZ and YMHWE; Amana NFW and YNFW; and Inglis IFW and YIFW. Also fits some laundry centers in these series: Whirlpool CET and CGT; and Maytag MLE and MLG.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
No hot or cold water
See more...

Gas Dryer Conversion Kit - NG to LP

$53.65

Fix Number: FIX1943997
Manufacturer Part Number: MAL9000AXX

This conversion kit contains all parts needed to convert your gas dryer from natural gas (NG) to liquid propane (LP). This kit will work with some Samsung dryers as well. Use model # to ensure you are getting the correct part.