General Electric Washer Dryer Combo Bearings

★★★★★

★★★★★

1 Review

Fix Number

FIX17137205

Manufacturer Part Number

WE03X37318

This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX17137203

Manufacturer Part Number

WE03X37317

This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front bearing. As the dryer rotates, the drum bearing slides help to support the front of the drum. If your appliance becomes noisy, is not drying properly, or leaves marks on clothes, it may be time to replace it. If you are replacing one slide, we recommend replacing the other slide at the same time, as they deteriorate at a similar rate. You will need to order 2 of these parts as there are 2 in each dryer. It is approximately 2.6-inches deep, 0.06-inches in height, and 0.5-inches wide. This part is denoted as being green in the title, however users and technicians have noted it is actually gray in color.

Fix Number

FIX17137207

Manufacturer Part Number

WE03X37319

f your dryer is excessively noisy when operating, is not tumbling, or is leaving marks on your laundry, it may be time to replace the drum glides. The drum glide bearing is a genuine OEM part for your dryer and is used to help the drum rotate smoothly and quietly. If the bearing has worn out, it can make your dryer noisy when operating, with a metal-on-metal sound. Please be sure to disconnect the power supply to the dryer before beginning this repair.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX960316

Manufacturer Part Number

WE3M26

Fix Number

FIX17626249

Manufacturer Part Number

WE03X37320

If your dryer is making a squealing, metal-on-metal noise you may need to replace your slide bearings. These slide bearings are genuine OEM replacement parts that measure approximately 3 inches in length. They act as a supportive liner for the dryer and prevent the scraping or squealing noise from occurring as the drum rotates. If the slide bearings have eroded or become damaged, they should be replaced.

Fix Number

FIX266777

Manufacturer Part Number

WE1M462

This rear drum bearing sleeve supports the dryer drum and helps it rotate smoothly. It’s a common fix for noisy dryers or drums that wobble or stop turning. Compatible with select GE and Hotpoint models, it restores proper alignment and reduces friction.

★★★★★

★★★★★

1 Review

Fix Number

FIX12342893

Manufacturer Part Number

WE03X25079

Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.

Fix Number

FIX12703118

Manufacturer Part Number

WE03X27679

This Genuine OEM drum bearing is a manufacturer-sourced replacement part designed for use with a variety of GE dryers. Engineered to support the rear of the dryer drum, this component plays a key role in reducing friction and noise during operation, helping your appliance run as quietly and efficiently as possible. Constructed from durable materials and sold individually, this part is essential for maintaining smooth drum rotation and overall dryer performance. When replacing the drum bearing, it is strongly recommended to also replace the drum slides, which are sold separately. Worn slides can contribute to excessive noise and uneven drum movement. Installation requires basic tools including a Torx screwdriver, flathead screwdriver, Phillips screwdriver, and pliers. Always consult your model’s manual for specific repair instructions and safety guidelines. Note: Drum slides are not included with this part and must be purchased separately.

Fix Number

FIX12539212

Manufacturer Part Number

WE03X25099

Fix Number

FIX265828

Manufacturer Part Number

WE13X10011