Refrigerator Valves

Refrigerator Water Inlet Valve

★★★★★

★★★★★

2 Reviews

This is a refrigerator water inlet valve and mounting bracket. It is responsible for releasing water from the supply line when triggered, which makes its way through to the water dispenser and/or icemaker in your refrigerator. It is located behind the refrigerator, connected to the water supply. This part is prone to material fatigue from normal use. A defective water valve could cause a lack of ice production, and your water dispenser to stop working properly. If the solenoids no longer have continuity or the valve is plugged, it will need to be replaced. For this repair, you will need to pull the refrigerator out from the wall and disconnect the water and power connection. Please note that this part may look different than the original but is a manufacturer-approved replacement.

Water Inlet Valve

★★★★★

★★★★★

1 Review

If the ice maker or water dispenser on your fridge are not working, or there is water leaking, it may be an issue with your water inlet valve. This part is found at the back of your refrigerator and supplies the water to both your ice maker and water dispenser. The materials can be worn out over time with regular use and should be replaced. Another area on the valve to inspect is the solenoids, which can be done with multimeter to check for continuity. This is a genuine OEM part that measures approximately 6.5 inches long by 3 inches wide and is made of plastic and metal. To replace this part, you will need access to the back of your fridge. Please ensure that you disconnect the power and water supply before beginning this repair.

Water Inlet Valve When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making or dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair.

Water Inlet Valve - 4 Coil The water inlet valve supplies water to the refrigerator ice maker and water dispenser. This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & Electrolux. Possible Repair Solution For: Leaking water, water will not dispense, ice maker does not make ice, ice maker does not dispense ice. This is an authentic water inlet valve (4 coil), which works with refrigerators.

Refrigerator Single Water Inlet Valve Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.

Water Inlet Valve

Water Inlet Valve Assembly

★★★★★

★★★★★

1 Review

This includes the primary and secondary valves along with the wire harness.

Dual Water Valve This part, when activated, releases water from the supply line into the ice mold. This water inlet valve is for refrigerators. Water inlet valve supplies water to the refrigerator ice maker and water dispenser. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

Water Valve This part releases water from the supply line when it's activated.

Dual Inlet Water Valve

★★★★★

★★★★★

1 Review

This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.