Admiral Range Elements and Burners

Oven Bake Element

★★★★★

★★★★★

10 Reviews

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

Bake Element

★★★★★

★★★★★

7 Reviews

If your oven is not coming up to temperature, has inconsistent or fluctuating temperatures, or just will not heat at all, there may be an issue with the bake element. This part is found at the bottom of the oven, and is the source of heat for your cooking and baking. This is a genuine OEM replacement bake element, but please note that new screws are not included with the part. You can either reuse the ones from the old element, or order new ones separately. Please be sure to disconnect the power supply to your oven before beginning this repair.

Surface Burner Receptacle Kit

★★★★★

★★★★★

1 Review

This genuine OEM kit includes the parts required to replace a surface burner receptable on your range. The kit comes with a plastic block, a metal bracket, high temperature wire nuts, and wires. The burner elements on the cooktop plug into the receptacle, and if the burner is not heating up properly, the receptacle may need to be replaced. Other signs that the receptacle is faulty is if there is corrosion on the element terminals. Before beginning this repair, please be sure to disconnect the power supply to your range. You will need a pair of wire strippers and a Phillips screwdriver for this installation.

Range Bake Element

★★★★★

★★★★★

2 Reviews

This bake element with push on wire terminals is located in ranges and ovens. The terminal depth is 3 inches, the total element length is 19 and the wire terminals are 16 inches wide. Detailed installation instructions are found in the manual provided by the manufacturer. If your element is not heating then replacing it can solve your problem.

Standard Y-Frame Range Surface Burner The manufacturer suggests replacing the receptacle at the same time.

Oven Bake Element

★★★★★

★★★★★

2 Reviews

This oven bake element with push-on terminals has a terminal depth of three inches, making a total element length of nineteen inches.

Element with Limiter 6 Inch - 1200W

★★★★★

★★★★★

1 Review

Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.

Broil Element This broil element is found on the roof of the oven.

Surface Element - 6 Inch This is a genuine OEM replacement part. This surface element is commonly used on ranges and cooktops. This is a six inch and four turn electric surface heating element. This element is what heats the cookware you are using on your range and cooktop. If your element is no longer heating it may need to be replaced. This surface element is sold individually. Before replacing this part make sure you unplug your appliance.

Surface Burner Element - 8 Inch This large surface burner is 2100W.