OEM Whirlpool Range Element with Limiter 6 Inch - 1200W [W10823711] | Ships Today | Fix.com
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
( Grid squares measure 1x1 inch )
Element with Limiter 6 Inch - 1200W – Part Number: W10823711 Element with Limiter 6 Inch - 1200W – Part Number: W10823711 Element with Limiter 6 Inch - 1200W – Part Number: W10823711 https://fixcom.azureedge.net/Schematics/Maytag/45821.gif

Element with Limiter 6 Inch - 1200W

1 Review
Your Price
$143.31

Fix Number: FIX11764915

Manufacturer #: W10823711

Manufactured by: Whirlpool

Part description

Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.

Works with the following brands

Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Kenmore, Inglis, Crosley, Admiral

Works with the following products

Range, Cooktop, Microwave Oven Combo

Fixes the following symptoms

Element will not heat | Will Not Start

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 4.2 / 5.0, 15 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rick from HUNTINGDON, PA
Parts Used:
W10823711
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The range top heating element burnt out
I removed the range top and took it apart. I then marked the wires as instructed. I then disconnected the wires, removed the old element, put on the new element and connected the wires (the extension wire provided in the kit made this easy). I then put everything back together and turned the power back on. The instructions provided with the replacement element made the process pretty easy.
3 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
Rameish from Clermont, FL
Parts Used:
W10823711
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
previous element was burnt and not functioning
First, disconnected the power, open the two screws on top front of stove, lifted the top surface and located the nonfunctional element. Secondly, disconnected the feed from the main electric supply that feeds the element. Finally,removed defected element and reconnected the new element to the electric supply by matching terminal and wire color and reassembled the top lid of stove. Upon completion, the burner was successfully operable.
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
ronald from Land O Lakes, FL
Parts Used:
W10823711
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
surface element no longer worked
followed the on line instructional video on the web site. It was easy to do
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Diane from West Salem, WI
Parts Used:
W10823711
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Element will not heat
I found that one of the 6" elements would not heat. I removed the glass top (2 Philips screws) underneath and one molex connector for the cables. I confirmed with my DVM without having to remove the element that it was open (defective). There are three different 6" element part numbers that can used with this stove and the first two numbers of the serial number indicate what element 'kit' is needed. The element itself between three kits is the same, but the new Thermo-switch is different from what is factory installed and adapter wires are needed in order to connect to the Thermo-switch connectors "1b" and "2a". Before removing the defective element, label the cables on how they hook up to the Thermo-switch (2a, 1b, 2b) because they are in different positions between the old Thermo-switch and the new thermo-switch. Connector "1a" is in same because it connects direct to the element. The heater kit also comes with hook-up instructions.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
AVIS from LIVERPOOL, NY
Parts Used:
W10823711
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 surface elements stop working
Watched the attached video. Followed the instructions, easy as pie. Saved at least leeway $100.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Wong from Carver, MA
Parts Used:
W10823711
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
The surface element was burn out.
First I switched off the breaker ,Then I used the nut driver to remove the 2 screws underneath the stove top. Then lift up the stove top and propped up with a box and then I used the nut driver to remove 2 addition screws that held the element .Matched up the wiring then plugged the new element in put the screw backed. It took about 15 to 30 minutes.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Mike from Florence, MT
Parts Used:
W10823711
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Surface element shorted out. Ceramic top range.
The new element was a perfect match. Unplugged range, remove 2 screws each corner of ceramic top, lift top up, my wife held top up while I changed out element. 1 /4" nut driver remove 2 screws with clips on each side of old element, unplug wires, old element is out. Match wiring on new element. Take off holding clips off old element match to new element, reinstall. Let ceramic top down, reinstall screws, plug range in, check out burner, works perfect, your done.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Beverly from Rocky Mount, VA
Parts Used:
W10823711
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
One of the 6" elements on my smooth top range stopped working.
After first watching DIY videos, I decided it looked simple enough to fix it ourselves. I phoned , and spoke with a very helpful Customer Service agent who was knowledgeable about the specific part that we needed. I placed the order late in the afternoon, and it was delivered to my door the very next day! My husband watched the video on the website that showed step by step how to replace the element. This was extremely helpful, and we would highly recommend that you take the time to do this before you begin your repair. Within 30 minutes, we had the new element installed and it worked perfectly! Thank you for saving us a very expensive service call on our Maytag range!
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Charles from Newtown, CT
Parts Used:
8004P093-60, W10823711
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Right rear burner stopped working
I followed the very clear directions given at the site: unplug the stove; remove the screws at each front corner holding the glass top onto the stove frame; pull the top forward and unplug the wire harness in the back; turn the top upside down on a padded table; unscrew the hold-down clamps for the burner; remove the wires from the old burner and put onto the new burner (one of them was a bit rusty so I used the brush to clean off that connector so that it would slide onto the spade on the burner easily); remove the burned out burner and put the new burner with wires connected into place; tighten down the hold-down clams (I had to replace one of the clamps with a new one because the original one was quite corroded); put the top back onto the stove and reconnect the wiring harness; push the top into place and replace the hold-down screws in the corners; plug the stove back in and try the burner; all burners now heating as expected.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Jairo from West babylon, NY
Parts Used:
W10823711
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Surface element stop heating.
open the surface after removing two screws,take a picture of the electrical connection to the element;replace it with the new one and connected same way as the picture shows...please shut down the circuit breaker before doing any thing!!!
0 of 1 people found this instruction helpful.
Were these instructions helpful?

Customer Reviews

Average Rating (1 Reviews):
5
out of 5
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

Fix Number: FIX11764915
Manufacturer Part Number: W10823711
Brand
Model Number
Description
Kenmore
22-98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Kenmore
62260002600
Range
Kenmore
62260003600
Range
Kenmore
62260008600
Range
Kenmore
62260009600
Range
Kenmore
62945775
Range
Kenmore
62945776
Range
Kenmore
62945779
Range
Kenmore
62960002600
Range
Kenmore
62960002601
Range
Kenmore
62960002606
Range
Kenmore
62960003600
Range
Kenmore
62960008600
Range
Kenmore
62960008601
Range
Kenmore
62960008606
Range
Kenmore
62960009600
Range
Kenmore
62960009601
Range
Kenmore
62960009606
Range
Kenmore
66595775890
Range
Kenmore
66595775891
Range
Kenmore
66595776890
Range
Kenmore
66595776891
Range
Kenmore
66595779890
Range
Kenmore
66595779891
Range
Kenmore
66598002700
Range
Kenmore
66598002701
Range
Kenmore
66598003700
Range
Kenmore
66598003701
Range
Kenmore
66598009700
Range