Jump to:
Product Description
This oven bake element with push-on terminals has a terminal depth of three inches, making a total element length of nineteen inches.
-
Works with the following brands:Magic Chef, Maytag, Crosley, Admiral
-
Works with the following products:Range, Wall Oven, Microwave Oven Combo
-
Fixes the following symptoms:Little to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
-
Part# WP74003019 replaces these:AP6010824, 04000058, 74003019, 74003019BU, 7406P064-60, 7406P092-60 ... Show more , WP74003019VP, Y04000058 Show less
- Works with the following brands:
- Magic Chef, Maytag, Crosley, Admiral
- Works with the following products
- Range, Wall Oven, Microwave Oven Combo
- Fixes the following symptoms
- Little to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
- Part# WP74003019 replaces these:
- AP6010824, 04000058, 74003019, 74003019BU, 7406P064-60, 7406P092-60, WP74003019VP, Y04000058
Part Number Cross Reference
Videos For installing this part.
Replacing your Oven Bake Element
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Catherine from Kansas, OK
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Oven element had actually melted when it had been turned on.
followed what the repair video had showed by taking out the two screws and unhooked the wires and plugged in the new element, replaced the screws and done. turned the oven on and cooked dinner right away. saved a big repair bill to a serviceman and service trips, one to come out and check the range and one to replace the element. probably
... Read more
around $200.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from West Babylon, NY
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Heating element in electric stove oven broke in 2 pieces.
Ordered part which was delivered in 3 days. Called son to come and install. 7 days later son came to repair. I had watched video on how to install so I supervised(kibbitzed). He shut power off at fuse box, removed element with a screw driver, used pliers to release connection and then reversed procedure, installing the element. It took ab
... Read more
out 9 minutes. Were I younger than 82 and could bend and reach, I could have done it myself. Back to baking.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Myrtle Creek, OR
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
lower element would not funtion, stove would not heat
Pull range out from wall far enough to unplug it.( to do this, lift up on the front of the oven about 1 inch while pulling out)Unplug range (if range is hard wired and there is no plug, push stove back in and turn the appliance off at the breaker, test to make certain there is no electricity to the appliance before continuing. Use electri
... Read more
c tester to make sure there is no electricity..or else you will be shocked with 220 volts. Remove oven racks. Remove the 2 Phillips screws at back lower left and right sides. Pull element out 2 inches, enough to see the wiring and friction fit clips attached to element. Detach clips from element. Remove old element. Install new element. Re-attach friction fit clips to element. Screw Phillips head screws to hold element in place. Replace oven racks. Close door. Plug stove back in, or turn breaker back on. To test, turn selector to oven, turn oven temp. to 350 degrees. See the new element glow bright red. Push range back in. You've just completed the install.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael F. from Aurora, CO
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Element partial warming.
Pulled the stove from the cabinets, unplugged stove from electrical outlet. Removed back cover. Removed two Philips-head screws inside oven and removed element. The male terminal ends of the oven element were 'burnt' and fell apart as I removed the heating element from the oven. At the backside of the stove, the female 1/4-inch electrical
... Read more
connectors were 'burnt' as well. I replaced the old female connectors, making sure they were 'crimped' tightly. I then installed the replacement oven element, and tightened the retains screw, firmly. I replaced the back cover, plugged in the power, wiggled the stove back into place, and baked oatmeal raisin cookie for New years Eve.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from knoxville, TN
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Bake elememt not heating
Replacement really simple. Remove two screws to release the element and then just pull the wire clips off each end. Then place wire clips back on the new element push element back in place. Line up the screws and tighten them. Job done and working. Price was very reasonable and received fedex in 3 days. Highly recommend this site
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Benjamin from Renville, MN
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven heating element melted
I removed both racks out of the oven. Used a phillips screw driver to remove the two retaining screw and pulled the element out. I disconnected the two attached wires from broken heating element. I then hooked up the two attached wires to the new heating element, pushed back in, installed retaining screws, and replaced oven racks. It took
... Read more
longer to open the box on the new element then it did to do the whole job!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juan from Keene, TX
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bake element fried
Baking element is attached to the back of the oven. Remove the 2 Phillips screws and save them. Softly pull the element and unplug the electrical connectors. Remove the old element and discard. Plug in the electrical connectors to the new baking element and secure it to the back of the oven reusing the previously saved Phillips screws. Te
... Read more
st . Done!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wesley from lake Hills, TX
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
oven element went out
Went good took about 3 min
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from New Blaine, AR
- Parts Used:
- WP74003019
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Heating element burned out
Took old element out installed new element.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Elk, WA
- Parts Used:
- WP74003019
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The bake element cracked due to age and use I suppose.
Pulled out the oven from the wall and unplugged it. Opened oven door, unscrewed the left and right screws. Pulled the element out slowly. Located and disconnected the electrical fittings on either side. Inserted the new element, reconnected electrical fittings. Guided the fittings and wire back into their holes and reinstalled screws. Pre
... Read more
tty daen easy.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Joseph T - August 26, 2021
Verified Purchase
cooks better in one piece
it is just as advertised, easy to install
Crystal C - January 28, 2021
Verified Purchase
Exact part and quick shipping
This saved us a ton of money - we were able to change the element and not have to buy a new stove. Exact part match and got it within a few days.
Model Compatibility
This part works with the following models:
Fix Number: FIX11744014
Manufacturer Part Number: WP74003019
Manufacturer Part Number: WP74003019
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.