Official General Electric Dryer Timers

Dryer Timer

$92.65

Fix Number: FIX11763064
Manufacturer Part Number: WE04X24550

If your dryer runs too long, stops too soon, or the timer knob is hard to turn, this part could be the fix. It controls how long each cycle runs and helps your dryer work properly. It’s located behind the control panel and is easy to replace. Just make sure to unplug your dryer before starting the repair.

Fixes these symptoms

Timer Not Working
Won’t Start
See more...

Timer

$87.64

★★★★★

1 Review

Fix Number: FIX11763067
Manufacturer Part Number: WE04X25280

This timer is a genuine OEM part supplied by the manufacturer for use in dryers. It is a high-quality replacement part that is designed to fit just like the original for your convenience. The timer controls the length of each cycle, such as drying, cooling, or tumbling by activating and deactivating various components of the dryer according to the cycle settings. If you are experiencing issues such as cycles not completing, difficulties starting the dryer,and damp clothing at the end of a cycle, then the timer is likely malfunctioning and will need to be replaced. The timer is located inside the control panel of the dryer.

Fixes these symptoms

Timer Not Working
Won’t Start
See more...

Dryer Timer

$90.29

Fix Number: FIX8746223
Manufacturer Part Number: WE4M532

This is a genuine OEM replacement timer for your dryer. It is used to control the dry cycle by regulating the length of time depicted by the different settings. If your dryer will not start or the timer will not advance you may need to replace the timer. Over time the timer shaft can become stripped and will not turn. Please note that the knob to adjust the timer is not included with this part but can be purchased separately if necessary. Please be sure to disconnect the power supply to your dryer before beginning this repair.

Fixes these symptoms

Timer Not Working
Won’t Start
See more...

Watch the install video

Dryer Timer

$91.88

★★★★★

1 Review

Fix Number: FIX8690648
Manufacturer Part Number: WE4M533

If your dryer will not start, the timer will not advance, or it shuts off too soon, there may be an issue with the dryer timer. If your timer needs to be replaced, this is a genuine OEM part. Please note that the knob to set the timer is sold separately, be careful not to damage yours when removing the knob to install the new timer. Before beginning this repair, please be sure to disconnect the power supply to your dryer. You will need to pull it out far enough from the wall in order to access the back panel. Before removing the wires, it may help to take a photo first, so that they can be attached to the proper terminal on the new timer. The timer is held in place on the control panel with two metal hooks locking into two plastic tabs. Carefully rotate the timer counterclockwise to remove, and clockwise to install the new timer into place.

Fixes these symptoms

Timer Not Working
Won’t Start
See more...

Dryer Timer

$80.64

Fix Number: FIX11759041
Manufacturer Part Number: WE04X24551

Restore your dryer’s performance with this genuine replacement timer, engineered to manage the timing of drying and tumbling cycles. It controls key functions by engaging internal switches at specific intervals. If your dryer won’t start, stops unexpectedly, or the timer knob becomes hard to turn, the timer may need replacing. Always unplug the appliance or switch off the circuit breaker before installation, and use protective gloves to avoid injury while working with electrical parts.

Fixes these symptoms

Timer Not Working
Won’t Start
See more...

TIMER

$81.17

Fix Number: FIX11763073
Manufacturer Part Number: WE04X25586

Fixes these symptoms

Timer Not Working
See more...

Timer

$77.48

Fix Number: FIX9491767
Manufacturer Part Number: WE04X20415

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

Fixes these symptoms

Timer Not Working
See more...

Dryer Timer

$106.34

Fix Number: FIX3654187
Manufacturer Part Number: WE4M527

This is a genuinely sourced dryer timer, sold individually. It keeps track of the desired time, making sure the dryer turns on and off at the proper time in that cycle. Some indications that it is time to replace the dryer timer are if the timer will not start or stop, it is not ticking down during the cycle, or it shuts off in the middle of a cycle. For this repair, started by disconnecting the power. Remove the timer knob and control panel. Lift the plastic tab on the old timer and rotate it counter-clockwise, leaving the wires connected. This will give you a reference when it comes time to connect the wires in the new timer (you could also snap a photo). To install the new timer, rotate it clockwise until it locks into place. Transfer the wires from the old timer to the new one, matching each connection. Reassemble the dryer, and you are all done with your repair.

Fixes these symptoms