General Electric Dryer Bearings

General Electric Appliance Parts

Popular General Electric Dryer Bearings

★★★★★
★★★★★
2 Reviews
Fix Number
FIX6447706
Manufacturer Part Number
WE1M1067
This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front bearing. As the dryer rotates, the drum bearing slides help to support the front of the drum. If your appliance becomes noisy, is not drying properly, or leaves marks on clothes, it may be time to replace it. If you are replacing one slide, we recommend replacing the other slide at the same time, as they deteriorate at a similar rate. You will need to order 2 of these parts as there are 2 in each dryer. It is approximately 2.6-inches deep, 0.06-inches in height, and 0.5-inches wide. This part is denoted as being green in the title, however users and technicians have noted it is actually gray in color.
Fixes these symptoms
★★★★★
★★★★★
3 Reviews
Fix Number
FIX459829
Manufacturer Part Number
5303281153
This ball-and-socket style bearing kit is used in your dryer to support the rear of the drum as it tumbles through the dry cycle. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time, the bearing or the bushing can wear out, and the ball support can become damaged. If these things happen, your dryer may not tumble, or it will be noisy while operating. If this is the case, you may need to replace these parts. This genuine OEM parts kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high-temperature lubricant, and the installation screws. Completing this repair requires taking the entire drum out of your dryer along with handling greasy parts, so have a rag handy for cleanup. Please ensure that you disconnect the power supply to your appliance before beginning this repair.
Fixes these symptoms
  • Drum Not Spinning
  • Marks left on clothes
  • Noisy
  • See more...
★★★★★
★★★★★
1 Review
Fix Number
FIX267529
Manufacturer Part Number
WE25M40
This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of the dryer drum and helps to reduce friction so that the drum can rotate smoothly and quietly. If the bearing has worn out, it can result in your dryer not tumbling, or making excessive noise when it is running.
Fixes these symptoms
Fix Number
FIX266777
Manufacturer Part Number
WE1M462
Sold individually.
Fixes these symptoms
Top Bearing
$75.77
In Stock
Fix Number
FIX1766010
Manufacturer Part Number
WE14M124
The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.
Fixes these symptoms
Drum Slide
$21.02
In Stock
Fix Number
FIX267877
Manufacturer Part Number
WE3X87
This slide is sold individually. Some dryers require up to three of these slides . Be sure to check to make sure you order the necessary amount for your dryer.
Fixes these symptoms
Rear Drum Bearing
$18.68
In Stock
Fix Number
FIX267865
Manufacturer Part Number
WE3X75
This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.
Fixes these symptoms
KIT TOP BEARING ASSEMBLY
$153.47
In Stock
Fix Number
FIX11736616
Manufacturer Part Number
WE01X25434
Fixes these symptoms
Front Drum Bearing
$73.35
In Stock
Fix Number
FIX267867
Manufacturer Part Number
WE3X77
This front dryer drum bearing does not come with slides.
Fixes these symptoms
Rear Bearing Kit
$134.13
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX267556
Manufacturer Part Number
WE25X10001
This kit comes with the rear bearing, shaft support, lubricant and other items required for the installation.
Fixes these symptoms

Related General Electric Dryer Parts