Electrolux Dishwasher Parts

Electrolux Appliance Parts

Popular Electrolux Dishwasher Parts

Tine Bracket
$37.49
In Stock
Fix Number
FIX975905
Manufacturer Part Number
154428402
This is a bracket, but it may also be known as a dishrack row clip, or simply a tine clip, and it is used in conjunction with your dishwasher. The purpose of this part is to fasten to the rack and the tine row. This will give the tine the stability it needs to hold your glasses and bowls by firmly attaching to the rack. You will not need any tools to make this repair. This piece is sold individually, measures to be about 2 inches by 1 inch, and is gray in color.
RACK ASSEMBLY
$111.92
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX16745761
Manufacturer Part Number
5304532969
This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, the part should be replaced. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.
Fixes these symptoms
Silverware Basket
$32.95
In Stock
Fix Number
FIX17219661
Manufacturer Part Number
5304535382
This is a basket for washing flatware or silverware in your dishwasher.
Fixes these symptoms

Installation Instructions

Charlotte from Greenville, IL
No problem
Removed broken basket; inserted new. Read more...
SUPPORT
$13.07
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX16745480
Manufacturer Part Number
5304532235
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spray arm and is found at the bottom of the dishwasher. The lower spray arm spins on the support when the dishwasher is running. If the support is cracked or broken, the spray arm may not spin, and your dishes will not be cleaned properly. You may also notice that your dishwasher is noisy when it runs; this can mean the arm support is damaged as well.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...

Installation Instructions

J D from Edgewood, WA
worn spray arm and support
remove arm pull straight up, remove strainer turn 1/4 turn, remove support three screws, install new parts Read more...
Heating Element
$77.48
In Stock
Fix Number
FIX3653449
Manufacturer Part Number
154825001
If your dishes aren’t coming out clean or dry, your dishwasher’s heating element might need replacing. This part heats the water and helps dry dishes, and it fits many models from Frigidaire, Kenmore, and Crosley. It’s located at the bottom of the tub and is easy to install—just unplug the dishwasher first. Sold individually.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...
Fix Number
FIX16745479
Manufacturer Part Number
5304532229
This is a single rack roller kit for your dishwasher. This kit comes with one axel/clip, and one wheel/roller. The kit is used for the lower dishrack, and allows your rack to move freely. You will need two kits for your upper and lower rack. We recommend replacing this part in pairs for an even wear. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.
Fixes these symptoms

Installation Instructions

Robert from Copiague, NY
Stalled Timer, dirty dishes, detergent wasn't dissolving properly.
At first I thought the Timer was bad because it was stalling. The Timer only malfunctioned in High Temp Wash or High Temp Rinse mode. After removing and checking the timer, I determined it was working OK. Someone mentioned that a bad thermostat could cause the Timer to stall, but I wasn't having any problems with hot water temperature. I noticed the detergent wasn't dissolving completely, and the water flowing into the tub sounded weak, so I replaced the water inlet valve. This solved all my problems. Dishes are coming out sparkling clean and the Timer doesn't stall in High Temp mode. I just followed the video on Part Select to make the repair. I didn't pull out the whole dishwasher from the counter and I removed the Lower Door panel in addition to the Kick Plate. Removing the Lower Door Panel provided easier access to the valve. I hope this helps other people troubleshoot their dishwasher. Once again this site saved me a chunk of money. Read more...
★★★★★
★★★★★
2 Reviews
Fix Number
FIX8689824
Manufacturer Part Number
A00126401
The drain pump ejects the water from the dishwasher.
Fixes these symptoms

Installation Instructions

Dave from HONEOYE FALLS, NY
Dishwasher would not drain, water still in base
Unplug dishwasher, Pull out dishwasher and lay on its side, remove 3 screws from drain pump and 2 electrical connectors. Replace pump, reconnect electrical connectors and tighten 3 screws. Reinstall dishwasher and plug in. Read more...
Fix Number
FIX17217958
Manufacturer Part Number
154756401
Sold individually.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Noisy
  • See more...
Fix Number
FIX1524878
Manufacturer Part Number
154106202
This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will solve this problem. The tools needed for this repair are a 1/2 inch wrench, 1/4 inch nut driver, and needle nose pliers. To repair, locate the two element heating nuts. Next, disconnect connecter wire and remove nut with wrench. Tip: when installing new nut, remember to add insulator sleeve back on. As a safety precaution, remember to disconnect the water supply line before beginning this installation. Also, unplug your dishwasher from the power source.
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not drying dishes properly
  • See more...

Installation Instructions

janet from Galena, MO
water leaking out bottom
turned off power to dishwasher at the elec. panel. removed the "kickplate" off front bottom of dishwasher. leak was coming from where the heating element went thru tub. removed connector from bottom of heating element and brass nut practically fell off. it was cracked. ordered new brass nuts from this site it arrived quickly and installed it immediately. used a deep well socket to tighten the nut and leak was gone. Waaa Laaa!! Read more...
Fix Number
FIX9494138
Manufacturer Part Number
807117001
The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long
Fixes these symptoms
  • Leaking
  • Not cleaning dishes properly
  • Not draining
  • See more...

Installation Instructions

Mary from San Antonio, TX
Unable to drain water in washer and leak in dishwasher
Hi, I had a dishwasher and a dryer go out during the same weekend. I ordered both parts about 3 hours apart. We (my husband) and I could not have been more pleased. Both came in the same package and were here in a short amount of time. The parts and shipping totaled about $58.00. We feel that we saved about $1000 that weekend by doing the work ourselves (and not replacing them) and using a very user-friendly website to diagnose the problem and getting the right parts. We will definitely order from this company again. As a matter of fact, I did order a shelf for our refrigerator and had the same outcome- very satisfied with all. Walter and Mary Read more...

Electrolux Dishwasher Appliance Types

Related Electrolux Dishwasher Parts

Popular Electrolux Dishwasher Models