Crosley Dishwasher Hardware

Heating Element Brass Nut This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will solve this problem. The tools needed for this repair are a 1/2 inch wrench, 1/4 inch nut driver, and needle nose pliers. To repair, locate the two element heating nuts. Next, disconnect connecter wire and remove nut with wrench. Tip: when installing new nut, remember to add insulator sleeve back on. As a safety precaution, remember to disconnect the water supply line before beginning this installation. Also, unplug your dishwasher from the power source.

Rubber Washer Sold individually. Used with the heating element.

Retainer Clip - Black The retainer clip is used to hold the access panel on your dishwasher in place. It is a genuine OEM part that is black in color and sold individually. The only tool required to complete the repair is a flat blade screwdriver. Turn the old clip a quarter turn counterclockwise to remove it, then line up the new clip and give it a quarter turn clockwise to lock it into place.

Torx Screw This is a genuine OEM Torx screw that measures 7-18 and 3/4-inch. The screw is sold individually and can be used in a variety of appliances. The star shaped head allows the screw to have more torque applied so the screw can be tightened securely.

Kickplate Mounting Screw Sold individually.

Screw - 10-16 x 1 This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer manual. *Please note: this screw is sold separately.

Water Delivery Tube Grommet This grommet fits on the spray arm of your dishwasher. This replacement part connects and seals the spray arm to the water hose that supplies water to the dishwasher tub. Be sure to shut off water supply to your appliance before completing this repair. This part is 3 inches in diameter and is off-white in color.

Cover Screw This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers, cooktops, trash compactors, grills, and ice makers. *Please note: This part is sold individually.

Screw, 8/18 x 3/8 This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

Screw - 8-18 x 1/2 Sold Individually.