Crosley Dishwasher Spray Arms

★★★★★

★★★★★

4 Reviews

Fix Number

FIX12585623

Manufacturer Part Number

5304517203

This is a single lower spray arm found in dishwashers to spray water and detergent vigorously over the dishes. This spray arm is made of plastic, so can warp or crack with time. The holes in the spray arm can get clogged with debris, so it should be cleaned every so often. If it is beyond cleaning or damaged, it will need to be replaced. If the holes are clogged, this can sometimes mean there is a problem with the filter system, so it is a good idea to inspect this as well. For this repair, start by turning off the water supply to the dishwasher. Pull the lower rack out of the dishwasher and out of the way. Remove the lower wash arm. Using a flathead screwdriver, push the small locking tabs located on each side at the bottom of the spray arm. You should now be able to easily pull the spray arm out of the dishwasher. Align the new lower wash arm and push it down to secure it in place. Make sure it can spin freely and is not making contact with the heating element. Place the lower dishrack back into the appliance and close the door.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12705424

Manufacturer Part Number

5304518927

If the Spray Arm in the bottom of your dishwasher becomes damaged or broken, it is important to replace it as soon as possible. Broken spray arms can result in your dishes not being cleaned properly, or cause water to leak onto your floors while running. Damage commonly occurs due to the spray arm melting; it can come loose during the wash cycle, and rests against the heating element. The plastic then melts, and the arm either does not fit back into place or the holes become distorted which causes water to spray in different directions. Replacing this part is easy, and tools should not be required. First remove the lower dish rack to access the spray arm, pull out the broken piece, and pop the new one into place. Once you put the dish rack back in, you will be ready to go! Spray arms for the upper rack are sold separately.

★★★★★

★★★★★

1 Review

Fix Number

FIX12712289

Manufacturer Part Number

5304518968

This genuine OEM part is a lower spray arm support for your dishwasher. It is found in the bottom of the dishwasher and is the piece that the lower spray arm attaches to. If this part has become damaged, it should be replaced so that your dishes are properly cleaned. To complete this repair, you will need to remove the bottom rack, lower spray arm, and the glass trap in order to access the support. No tools are required to remove any of these pieces. The old support simply twists out with a clockwise turn, and the new support can be lined up with the tabs and twisted in place with a counterclockwise turn.

Fix Number

FIX11770527

Manufacturer Part Number

5304506740

This is an OEM center spray arm, which works with dishwashers.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX11770483

Manufacturer Part Number

5304506516

The upper spray arm is found above the top rack in your dishwasher. If your dishes are not properly cleaned after the cycle has finished, the spray arm may need to be replaced. As the part is made of plastic, it can crack or disintegrate over time. Replacing this OEM part is a simple repair that does not require any tools. Remove the rail stop clips from the top rack rails, and then remove the top rack from the dishwasher. With the rack out of the way you will be able to access the upper spray arm. Unthread the nut holding the spray arm to the ceiling of the dishwasher, and remove the damaged spray arm. Line up the new spray arm, and begin to thread the part onto the inlet tube. The nut should be firmly tightened so that there are no leaks, and the spray arm should be able to spin freely. The top rack can be placed back inside the dishwasher, and the rail stops reattached.

Fix Number

FIX11745480

Manufacturer Part Number

WP8268873

This genuine OEM nut is used to hold the lower spray arm in place. The lower spray arm is found at the bottom of the dishwasher, and you will need to remove the bottom dish rack in order to replace the nut. Some signs that you may need to replace this part are if the spray arm is coming loose or falling off, or if the nut is missing or damaged. No tools are required to replace the part. If the old nut is still in place, simply twist it counterclockwise to remove it then twist the new one into place.

★★★★★

★★★★★

1 Review

Fix Number

FIX11741334

Manufacturer Part Number

WP3376846

This genuine OEM seal fits under the lower spray arm in your dishwasher. It is also known as a bearing ring and is used to create a seal between the spray arm and the sump housing. The part measures approximately 2 inches in diameter, is made of a white plastic, and has been purposely designed with the split in the ring. No tools are required to replace the seal, simply remove the lower rack in the dishwasher and unscrew the nut holding the lower spray arm in place.

★★★★★

★★★★★

1 Review

Fix Number

FIX11747064

Manufacturer Part Number

WP9742946

This authentic OEM part is a wash arm bearing ring for your dishwasher. The bearing ring works in conjunction with the bearing nut to hold the lower spray arm in place. A sign you may need to replace the bearing ring is if the lower spray arm is wobbly when spinning. Over time the bearing ring can become cracked, chipped, or warped and will need to be replaced. No tools are required for this repair, simply remove the lower rack from the dishwasher and then unscrew the bearing nut. Remove the damaged bearing ring and drop the new one in place. The bearing nut can be twisted back in, and the dishrack put back in place.

Fix Number

FIX9865072

Manufacturer Part Number

807145201

This plastic cover and stem assembly helps hold the lower spray arm in place.

Fix Number

FIX11745436

Manufacturer Part Number

WP8268340

Also known as a wash arm seal.