22314 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- dennis from Milton, MA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
heating element was cracked
I took out the old heating element and pluged in the new one. Very simple. Just like putting a plug into an electrical outlet
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- vito from palm desert, CA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced grill for 2 more burners
Took out of box and plugged into slot.....even I was capable of doing this....easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Centralia, WA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old element did not work
just plugged it into the unit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from New London, WI
- Parts Used:
- A341
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Grill cover was getting old and discolored
We ordered the part for replacement. You sent it and we just put in on the stove. It was exactly what we wanted.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from Sedro-Woolley, WA
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Lefrt Front Burner Quit Working
Removed two nut screws (accessed with oven door open) with nutdriver, panel dropped out. Transferred wiring one-by-one to new switch, removed old switch with allen wrench, installed new switch, replaced panel. Done! However, the problem is not corrected and all other possibilities have been explored with no solution in site. Ideas needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Myron from Norwalk, CT
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cartridge was old and worn out.
Pulled out the old one, pluged in the new one. It took me longer to open the box! PartSelect made it so easy to order and the shipping was super fast and at low cost. I looked on ebay and saw people paying more (with shipping and handling) for used parts. Thank you PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Lake Park, GA
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace grill with burners
Lifted the grill out and slid the new burner unit in place. This was very easy; no problem at all.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harold from Savoy, IL
- Parts Used:
- JEA7000ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no heating element
I think Part Select is great, but my story? I just plugged in a module.
It was so easy...well...a technical writer--one of those people who writes operation manuals--could have done it. But afterward, they wouldn't have been able to explain to anyone other than another tech writer how it was done.
It was so easy...well...a technical writer--one of those people who writes operation manuals--could have done it. But afterward, they wouldn't have been able to explain to anyone other than another tech writer how it was done.
Was this instruction helpful to you?
Thank you for voting!
both burner switches failed intrenally
simply remove and replace th switches using a screw driver an a pair of needle nose pliers
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Dunnellon, FL
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The 6in burner would go to max heat regardless of the setting.
Un screwed the two screws in the downdraft section enough to release the unit that holds the surface burner controls.Then removed the control nob, unscrewed the two screws that holds the switch in the unit, removed the wires, making sure the color of the wires were placed on the same contact point. Put it back together and it worked
fine.Of course I did shut off the power before starting any of the above
fine.Of course I did shut off the power before starting any of the above
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Tlown and Country, MO
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
my old cartridge was ugly and rusting out
Just unplugged the old cartridge and plugged in the new one. It took 2 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- karen l from bethlehem, PA
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacement of worn out burner cartridges
Pulled out old cartridges and installed new. Very easy and they work perfectly.
I was very happy with the extremely timely receipt of my purchase which was overnight. I paid for standard 3-5 day delivery.
This was a wonderful experience and I thank you again for your help.
I was very happy with the extremely timely receipt of my purchase which was overnight. I paid for standard 3-5 day delivery.
This was a wonderful experience and I thank you again for your help.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lynn from ARVADA, CO
- Parts Used:
- JEA8120ADBA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
One of the burners in one of the glass ceramic cooktops stopped working.
I first thought it was the switch. I ordered one and the wrong one was shipped to me FROM ANOTHER COMPANY. After more trouble shooting I discovered it was the cartridge that needed to be replaces. I ordered one and again, the wrong one was shipped to me. They told me I could not get the right part because they were not made anymore.
So, I shipped it back and got in touch with Part Select. They found the right part and shipped it to me in 2 days. Problem fixed with the EXACT right part. I ordered the first part more than two months prior to receiving the correct part from PartSelect. All I had to do was plug it in to the recepticle in the stove. No tools required.
So, I shipped it back and got in touch with Part Select. They found the right part and shipped it to me in 2 days. Problem fixed with the EXACT right part. I ordered the first part more than two months prior to receiving the correct part from PartSelect. All I had to do was plug it in to the recepticle in the stove. No tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HELGA from INDIAN TRAIL, NC
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
jenn-air coil element was old (1983) just needed to be replasted
took the old one out ,poped the new one in, took 2 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from CALLAHAN, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
None
Just slipped the part into the electric outlet
Was this instruction helpful to you?
Thank you for voting!