22314 (1988) Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Batavia, NY
- Parts Used:
- W11120791
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Broken Surface Burner control
Remove 4 screws that holds down panel;removed dial;removed screw that held switch to panel. Took off wire one at a time ann put on corresponding lug. Repeated above in reverse.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Chehalis, WA
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
burned up switch
Opened the back of the cooktop and found upper right element control switch burned. I removed the retaining screws and wires and spent two weeks chasing the switch at a local dealer. Found exactly what I needed at PartSelect.com and paid less even with shipping than at the local. Installed the switch with original screws and presto!! it worked.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Antonio from San Antonio, TX
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old element cartridge had broken.
To repair, I just pulled out the one unit and replaced with the new. Took longer to get the unit out of the box. We are greatly pleased. Ordered on Thursday and had the unit by Saturday. Saved over $100.00, WILL shop PartSelect again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Burns, TN
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burned out element
Opened packaged slid new element into place and turned on. End of that job. Cooked dinner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sandra from Breckenridge, CO
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Jenn Air stove top grill had stopped functioning
I decided to remove the original Jenn Air grill from my stove top and replace it with a new Jenn Air radiant Element Cartridge. I searched on Google for 'Jenn Air radiant top' and immediately found just the item on the PartSelect.com website. I placed the internet order that day and two days later -- kaboom - the part has arrived. I pluggedd it into the stove top (no tools needed) and it was better than new. Wow, that's what I call a great experience! Thanks PartSelect. - Sandi Phillips
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Salem, OR
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
elements did not work
Take cartridge out of box, slide into slot, done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Natalie from North Reading, MA
- Parts Used:
- W11120791
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
front burner stayed on high
We unplugged the range from the wall first so as not to get electrocuted. We removed the face of the control panel by removing the screws and 2 hex nuts underneath that hold it in place, and removed the trim. Then we disconnected the malfunctioning control switch, taking note of what order the wires go in. Hooked the new switch up and popped it through the face of the control panel. We then put the trim back, and reattached the control panel with the screws. Very easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- bintu from brinkley, AR
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cook top is not working
i just order new cartridge and just plug in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from Quincy, FL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
didn't heat up as it should and pots would not sit level
just pull out moving fromm side to side until unplug from outlet
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenia from Miramar, FL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace grill elements with convention coil elements
Easy as 1-2-3. Opened the box, took out the new electric coil elements, plugged it in to our stove and it worked perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Clinton, OK
- Parts Used:
- A122BA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed additional cooking space
I removed the element from the box it was shipped
in. I did this very carefully with two hands and then
plugged the new element into the electrical outlet
and turned on the element using all available
heat cycles. It worked perfectly and was exactly
the same color as the older one.
I suggest you use two hands in performing this
very delicate manuver.............j
in. I did this very carefully with two hands and then
plugged the new element into the electrical outlet
and turned on the element using all available
heat cycles. It worked perfectly and was exactly
the same color as the older one.
I suggest you use two hands in performing this
very delicate manuver.............j
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- gilbert from san antonio, TX
- Parts Used:
- W11120791
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
grill was getting red hot with out control
Followed instructions, once saw and how to replace and replug wires as the instructions it was easy as per your instructions
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from New Plymouth, ID
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JohnPaul from Ft. Bragg, CA
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Albert from Annapolis, NC
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
none
no problem
Was this instruction helpful to you?
Thank you for voting!