FRQE7000LW0 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lukas from Pasadena, CA
- Parts Used:
- 5303207102, 131658800
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
latch broken
pulled out old catch with old pliers and popped new one, simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joan from Roanoke, AL
- Parts Used:
- 131775600
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Shreking noise when turning on, then loud noise from dryer, after a few minutes it would not be so loud but louder than normal.
Replaced everything on the dryer till I got the right problem, seriously, I now have a new dryer in an old body, still came out alot cheaper than buying a new one. I listened to every sound on youtube but none sounded like my dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jane from blairsville, GA
- Parts Used:
- 134813601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
The door safety or something needed replaced.
I called a wonderful friend who diagnosed the problem; ordered the repair part; and fixed it!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Otsego, MN
- Parts Used:
- 134587700
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dryer was not drying completly.
I replaced the Control Thermistor (part # PS1149368) by removing the two screws on the bottom of the lower panel below the door. You will see the Control Thermistor just below and to the left of the discharge chute. Remove the two screws holding the Control Thermistor in place. Disconnect the two wire and reconnect to new Control Thermistor. Replace screws in reverse order of above.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROBERT from valley springs, CA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
front loading washing machine.
This is th esecond handle I have installed on this washing machine. The model number has disappeared from the label from being exposed to detergent and age. This web site provided EXCELLENT guides to ensure the correct part was ordered. The picture perfectly matched my handle. The part arrived VERY quickly and with EXCELLENT packing to ensure the plastic part was not damaged. The installation required two minutes to remove the damaged handle and install the new handle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jon from martin, GA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken door handle
New handle arrived and my wife put it on before I even got home from work. Two screws on the inside of the door, change out handles and replace two screws, very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joscelin A. from Greenville Jct., ME
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door handle broke...snapped the plastic on the top of the handle.
Took the two screws out of the door. Took out the broken handle. Replaced the new handle that fits in to the holes, and replaced the screws back in it. The screws hold on the handle. Easy to replace!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Birmingham, AL
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door handle had broken off.
I opened the door, located the two phillips head screws. Using the phillips head screwdriver, I unscrewed the two screws and removed the broken handle pieces. Then I put the new handle in place and using the two screws I had removed earlier, I screwed them into the handle snuggly. An easy job!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheila from Cincinnati, OH
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle broken by screws.
Screws taken out, new handle put on. Less than 5 minutes. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nicholas from Story City, IA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Poly carbonite door handle snapped
Remove two phillips head screws on the inside of the door, fit the new part and reused the screws to attatch it. Careful not to overtighten the screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- patricia from simi valley, CA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
replaced broken door washer handle. second incident
removed both screws. positioned handle. inserted the screws. tighten with screw driver done within two minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Lolo, MT
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle cracked.
Rather than call repair co. and pay at least $100 plus parts, i decided to order parts myself. It came in less than a week. Watched the video on website. Did the repair by removing old handle with phillips head screw driver and installing new. Took about 5 min. I am a 72 tear old woman. Thanks for being online.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Pismo Beach, CA
- Parts Used:
- 134412860
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken washer handle
put the new handle in place on door and screw it in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Gibsonia, PA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle broke at where screw holds it to the door
really bad design on the door, door breaks when pull is slightly upwards and washer is on the bottom of washer dryer stack so pull is always up.this is my third one. remove two screws and replace . takes about 2/3 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Monroe, GA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle was broken at the screw attachment areas.
I took a #2 phillips head screw driver & removed the old pieces from the broken handle, & installed the new one with the 2 screws. It fits perfect & I con't have to hear my wife complain about opening the door anymore!
Was this instruction helpful to you?
Thank you for voting!