Models > FRQE7000LW0 > Instructions

FRQE7000LW0 Frigidaire Dryer - Instructions

Jump to:

All Instructions for the FRQE7000LW0
91 - 105 of 117
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Scott from Otsego, MN
Parts Used:
134587700
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer was not drying completly.
I replaced the Control Thermistor (part # PS1149368) by removing the two screws on the bottom of the lower panel below the door. You will see the Control Thermistor just below and to the left of the discharge chute. Remove the two screws holding the Control Thermistor in place. Disconnect the two wire and reconnect to new Control Thermistor. Replace screws in reverse order of above.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jane from blairsville, GA
Parts Used:
134813601
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
The door safety or something needed replaced.
I called a wonderful friend who diagnosed the problem; ordered the repair part; and fixed it!!!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FRQE7000LW0
91 - 105 of 117