FRQE7000LW0 Frigidaire Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mike from Odenton, MD
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Had a broken Door Handle
It is very very simple. All you have to do is remove two screws on the inner side of the door and the handle will pop right off. Then put the new handle in its place, and put those two screws back where you took them from, and now it is good as new!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from San Diego, CA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
I had broken the handle while opening the door
Talk about super simple. Just open the dryer door, locate the two Phillips head screws holding the broken piece, undo them and you may have to hold the broken piece with a pair of pliers to get the screw out. Place the new handle in the appropriate position and re-install the two screws. Done....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from LaGrange, GA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door handle
Un screw 2 phillips scres on inside of door.Remove old handle Install new handle. If it takes 2 minutes you have done something wrong!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- michael from mocksville, NC
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle cracked at the top
Handle cracked from pulling at the top, cracked and eventually broke, had to order the replacement, anyone could do it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Al from Slidell, LA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cracked Door Handle
After receiving the new handle I used a phillips head screw driver to remove two screws on the inside of the door panel and took off the broken handle. I then attached the new handle in place with the same screws that I removed from inside of the door panel. It took less than a minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bret from Tampa, FL
- Parts Used:
- 131658800
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I shut the door too hard, and the old latch fell down into the inside of the dryer.
The new latch easily snapped it into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Mayfield, KY
- Parts Used:
- 131658800
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no problem
put door catch in hole
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Darlington, SC
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door handle broke
Took screws out back of door handle.put new door handle up and put screws back in.it was a breeze.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sabrina from Alexandria, VA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
waher handle cracked and came off
Waited way to long to order the part but once I did It arrived the next day. I unscrewd what was left of the old, screwed on the new and I had a new Washing machine wala!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from SACRAMENTO, CA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic outside handle broke
Took my husband less than 3 minutes to remove broken parts and install new handle. Wish the manufacturer made the originals out of metal. Your video made it embarrassingly easy for all who attempt this repair.
Was this instruction helpful to you?
Thank you for voting!
Door hinges and handle on washing machine needed replacement
Hi,
The repair should have been able to be completed by the repair team I called out from Sears. Their minimum charge was $109.00 and then whatever parts, etc… The TWO repairmen came in and looked at the front of the washing machine and promptly told me that they wouldn’t be able to fix the machine because they couldn’t find the model number. They were there less than 5 minutes. After they left without any suggestions on how to fix the washer door; I took to the internet, found the machine, ordered the parts and paid for them over the internet. It was a LOT less than the initial $109.00 that Sears repair were going to charge us. The repair took less than a half hour. The parts came just 3 days after I ordered. Used a screwdriver to remove worn out pieces and replace with new pieces. It couldn't have been simpler. You will be my source from now on.
Steve
The repair should have been able to be completed by the repair team I called out from Sears. Their minimum charge was $109.00 and then whatever parts, etc… The TWO repairmen came in and looked at the front of the washing machine and promptly told me that they wouldn’t be able to fix the machine because they couldn’t find the model number. They were there less than 5 minutes. After they left without any suggestions on how to fix the washer door; I took to the internet, found the machine, ordered the parts and paid for them over the internet. It was a LOT less than the initial $109.00 that Sears repair were going to charge us. The repair took less than a half hour. The parts came just 3 days after I ordered. Used a screwdriver to remove worn out pieces and replace with new pieces. It couldn't have been simpler. You will be my source from now on.
Steve
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janice from Nantucket, MA
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The plastic handle broke off
There was video but all you do is unscrew the old screws and line up the handle and screw them in..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond Frattone from Richboro, PA
- Parts Used:
- 131658800
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Door would not close because of broken female latch.
Very simple. I removed the broken latch with pliers and snapped in the new one in less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vanessa from Mardela Springs, MD
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle broke
Open door, remove 2 screws, line up new handle and replace 2 screws
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Dagsboro, DE
- Parts Used:
- 134412860
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic Door Handle broke
Purchased a new handle and istalled. Ordered replacement handle at about 3:00PM on a Thursday, it was shipped to my home and arrived the next day on Friday. Great service.
Was this instruction helpful to you?
Thank you for voting!