FRQE7000LW0 Frigidaire Dryer - Instructions

Blower wheel came apart from molded-in nut, was loose, was rubbing on housing wall, and was likelynot moving to much air. I read some troubled stories about separating the wheel nut from the motor shaft so bought a new motor and blower housing and install wall pretty easy. There are videos on the teardown process and does that long and not alot of parts to keep track of either. I have already done the felt drum liner and rear drum ball and belt so if it's older than 15 years and your going to take the dryer apart, replace all these parts and you will about have new dryer at half the cost of new.

I purchase one tube of heat resistant adhesive but I change both seals if you could afford to buy a second to I would recommend you do so the one tube just made it. For instructions on how to prepare the drum for installing new seals I went on YouTube

I seen a post on your website referring to the exact problem I was having. One of your staff recommended changing the control thermistor, which I did following the U-Tube video link you supplied. The repair went well and the dryer now operates perfectly ! Thanks for the accurate and helpful info.

Very simple fix - two screws out - replace handle and reinsert screws. The best part was how quickly I received the parts.

All I had to do was pop in the new door catch. Works perfectly.

I researched possible causes on line and watched a PartsSelect video on YouTube on how to test. I ended up misreading test results and ordered the High Limit Thermostat but subsequently realized problem was the Terminal Block. No problem, PartsSelect took back the Thermostat (I hadn't installed it) and shipped me the Terminal Block. My dryer was back up and running in less than 7 days from initial analysis to installation of Terminal Block. Instructions that came in confirmation email for installation were perfect and easy to follow. Total cost with new power cord from Home Depot was less than $50 vs a quoted service call of $175+ parts from local electrician.

When a teen age girl is going through, what I termed as "Bi-Polar" years (ages puberty to 16), they tend to break things with abnormal strenght and misdirected rage.
In this instance my poor washer took the brunt of her wrath, after 2 weeks of being told to do her laundry. this model of washer is a front loader, and the door locks when operating. she just pulled the handle, a black plastic bit, that broke. I looked up the part, ordered and had the thing fixed within 4 days of it breaking. It was two screws and done. now we can wash clothing in the peace of knowing we can open the door.

Two screws to remove the handle and replace with new one

Very simple. Just remove the broken door handle by unscrewing two screws from inside washer door. Replace with the new door handle.

Simple: Just removed 2 phillips screws, threw the broken handle in the trash, & put the new one on with the 2 screws. Problem solved.

I took the old piece off and put the new one on very easy

I simply removed old handle by taking out the 2 screws from back of door and then replacing them into new handle . Repair man quoted me 50 dollars plus cost of part ,which was much higher than Part select price . The itemized drawings on the website are wonderful making it easy to order correct part first time .

arrived in 2 days. Using this company the replacement part cost me 75% less than the manufactures part, and it fits perfectly. It has a Slightly different color, but the price difference was huge. It was Very easy to install in only 2 minutes with a phillips screwdriver using the 2 screws provided. The manufaturer's part was $80 plus $11.00 shipping. This part cost me $25 with shipping. Amazing!

removed the 2 screws holding the handle in place,that was the hardest part as the plastic piece that the screws set into was broken and I had to use a piece of tape to pull the broken receptical out. the rest was a piece of cake. delivery was very fast and ordering was so easy! thank you and I am sure I will be doing business with you again! thanks for everything!

Had to use a needlenosed pliers and a phillips screwdriver to remove the top screw where the hanle had broken off. The bottom screw removed easily. The new handle screwed into place in a couple of minutes.