Spark Igniter Set WP74005890
$86.47
In Stock
- Fix Number:
- FIX11744110
- Manufacturer #:
- WP74005890
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This part provides the spark to the burners.
-
Works with the following brands:Jenn-Air
-
Works with the following products:Range, Cooktop
-
Fixes the following symptoms:Will Not Start, Gas igniter glows, but will not light
-
Part# WP74005890 replaces these:AP6010920, 74005890, 74006098, 7432P120-60
- Works with the following brands:
- Jenn-Air
- Works with the following products
- Range, Cooktop
- Fixes the following symptoms
- Will Not Start, Gas igniter glows, but will not light
- Part# WP74005890 replaces these:
- AP6010920, 74005890, 74006098, 7432P120-60
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Justin from Edinboro, PA
- Parts Used:
- WP74005890, 74004053
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
No spark when I tried to light the burners
1) remove the cook top tray by lifting up on the back of it and gently pull it backwards 2) now that the cooktop tray unit is removed, remove two screws from each side and lift the drip pan off of the base tray 3) use pliers to gently pull down on the metal clip that holds the wire to the top burner igniter of both burners 4) remove t
... Read more
wo screws that hold the igniter in place in gently remove it 5) place the new igniter in through the hole, and reattach the two screws that hold it in place. 6) I broke one of the wires and had to replace the spark igniter set ( wire harness). This was done easily by removing two screws replacing igniter set, then replacing the screws. 7) reattach the wires to the bottom metal prong of the top burner igniter. Do this for both burners. 8) gently set the drip tray back into the lower tray. Be careful to line up the tubing which will carry gas to the burner with the holes in the lower tray. 9) replace two screws on each side that hold the drip tray to the lower tray 10) gently replace the entire tray unit, being careful to first line up the metal prongs with the holes in the front of the unit. You should now be ready to cook again!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Will from Webster, NY
- Parts Used:
- WP74005890
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burners would't light
Remove the dual burner unit. Using phillips head screw driver, take the back cover off. Remove the old two prong connector. install the new two prong connector. Put the back cover back on. Install the dual burner into the stove top. Turn on burner to check.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11744110
Manufacturer Part Number: WP74005890
Manufacturer Part Number: WP74005890
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.