Models > JGD8130ADW

JGD8130ADW Jenn-Air Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for JGD8130ADW

Viewing 5 of 5

Manuals & Guides for JGD8130ADW

Click to download
Keep searches simple, eg. "belt" or "pump".
This is a genuine OEM replacement grease filter for downdraft exhaust ranges and cooktops. The filter is used to trap grease and particles that result from cooking and will need to be replaced once th...
In Stock
Order now and your part arrives by May 7
These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.
In Stock
Order now and your part arrives by May 7
This top burner igniter comes with a mounting bracket.
In Stock
Order now and your part arrives by May 7
$21.82
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by May 7
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by May 7
This part provides the spark to the burners.
In Stock
Order now and your part arrives by May 7
This may look different than the original, but is a functional equivalent. When installing this part, you may be required to drill holes and file the metal edges to adapt the switch to the original panel.
In Stock
Order now and your part arrives by May 7
This jar is a little over five inches long. It is made of glass and is used for collecting the grease drippings of gas ranges.
In Stock
Order now and your part arrives by May 7
This grill grate is sold individually.
No Longer Available
This is the replacement brass seal for your range or cooktop. It is made of brass and is approximately 1 inch in diameter. This part may also be known as the surface burner orifice holder seal. It pre...
In Stock
Order now and your part arrives by May 7
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
Order now and your part arrives by May 7
$133.24
This range surface burner head is designed to distribute gas evenly through precision ports to create a consistent, stable flame for reliable cooking performance. Featuring a 1/2-inch burner size and ...
In Stock
Order now and your part arrives by May 7

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for JGD8130ADW

Viewing 4 of 4
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
ELOISE from MILFORD, OH
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replaced filter
pulled old one out , cleaned the area & replaced with the new one.
486 of 513 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
deborah from fort pierce, FL
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old grease filter that I actually did not know I had to change
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
451 of 540 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
roy from East Providence, RI
Parts Used:
74004053
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed t hat rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
142 of 162 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!