OEM Black and Decker Bench Grinder Parts & Accessories

Washer

$6.51

Fix Number: FIX9963654
Manufacturer Part Number: 5130830-00

This is a flat washer for your power tools. Most commonly it provides a tight seal for the connecting pieces inside the reel of your machine. It also helps distribute the pressure in your tool. To replace it you will need a screwdriver.

Bolt,carriage

$6.51

Fix Number: FIX10168754
Manufacturer Part Number: 286064-00

This is a manufacturer approved carriage bolt designed for use with bench grinders. It is used to secure brackets and the knob. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened. This bold is made out of metal and it is sold individually.

Eyeshield

$29.12

Fix Number: FIX10184433
Manufacturer Part Number: 761834-00

This is a Genuine OEM replacement part used on Bench Grinders. It helps to protect user and the users eyes from the debris while the Grinder is in use. This part is made out of Clear Plastic with a Metal Bracket. To replace this Eyeshield you would need a Screwdriver to secure it to the unit.

Bracket,r. Mtg.

$6.69

Fix Number: FIX10184419
Manufacturer Part Number: 761369-00

This item has been OEM sourced to ensure a high level of quality. The metal bracket is intended to be used with bench top grinders. The item attaches to the motor cover assembly. The bracket is used to mount the right side wheel guard. This item is sold as an individual replacement part.

Tool Rest

$14.42

Fix Number: FIX10168756
Manufacturer Part Number: 286066-00

This is a genuine manufacturer sourced replacement part designed for use with Dewalt bench grinders. This tool rest acts as a support for the material when the grinder is in use. It is made out of metal and it is sold individually. Please note the screw and the nut used to secure it to the unit are sold separately. You would need a wrench to complete this repair.

Bracket,l. Mtg.

$6.69

Fix Number: FIX10184421
Manufacturer Part Number: 761371-00

The bracket attaches to the washer and the knob and is made of metal. It is an authentic OEM sourced item which is specially produced for use with bench grinders made by DeWALT and Black & Decker. Keep in mind this high-quality part is sold individually. A screwdriver may be helpful when replacing this item. This part may become broken and will need to be replaced.

Bracket

$11.45

Fix Number: FIX10184418
Manufacturer Part Number: 761368-00

This is a genuine replacement bracket assembly. It is supplied directly from original equipment manufacturer for use with bench grinders. This bracket helps to secure the eyeshield to the main unit. It is made out of metal and it is sold individually. Please note the hardware and the eyeshield are both sold separately. To complete this repair you would need a screwdriver and a wrench. • Make sure the unit is unplugged • Remove the screws that secure the eyeshild • Remove the nut and the carriage bolt • Replace old bracket with a new one • Reassemble in reverse order

Bracket

$6.51

Fix Number: FIX10184420
Manufacturer Part Number: 761370-00

This item has been sourced from the original manufacturer and is intended to be used with bench top grinders from Black & Decker and DeWalt. The metal bracket attaches to the top of the left wheel guard and is used to mount the left side eye shield. The bracket can be purchased as a single item, please note the hardware and eye shield are separate items.

Spacer

$6.51

Fix Number: FIX10184406
Manufacturer Part Number: 761353-00

It is a genuine item that is supplied directly from the original manufacturer for use with DeWALT and Black and Decker bench grinders. A spacer is generally utilized to provide a tight seal between connected components allowing them to rotate with minimum friction. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your specific model for the exact location and application of this spacer. Keep in mind it is made of durable metal and is sold individually.

Plate,flat

$6.51

Fix Number: FIX10184417
Manufacturer Part Number: 761367-00

This part has been sourced from the original manufacturer to ensure quality. The flat plate is intended to be used with bench top grinders from DeWalt and Black & Decker. The plate is used to disperse pressure put on the underside of the eyeshield by the bolt that secures the eyeshield. This item is sold individually, please note two flat plates may be needed.

Black and Decker Bench Grinder Parts

Popular Black and Decker Bench Grinder Parts

Black and Decker Bench Grinder Appliance Types

Popular Black and Decker Bench Grinder Models

Black and Decker Bench Grinder Parts

Start With Your Model Number

Popular Black and Decker Bench Grinder Parts

Black and Decker Bench Grinder Appliance Types

Popular Black and Decker Bench Grinder Models