Bench Grinder Parts

Washer

$6.51

Fix Number: FIX9963654
Manufacturer Part Number: 5130830-00

This is a flat washer for your power tools. Most commonly it provides a tight seal for the connecting pieces inside the reel of your machine. It also helps distribute the pressure in your tool. To replace it you will need a screwdriver.

Ball Bearing

$30.18

Fix Number: FIX10463892
Manufacturer Part Number: BB-6204ZZ

This is an authentic OEM replacement part used for various handheld power tools including models by Powermatic, Jet, and Wilton. Bearings stabilize and buffer moving parts to facilitate rotation of such parts as shafts, axles, and gears. They are commonly replaced due to this high wear function. This part sold individually.

Bracket

$11.45

Fix Number: FIX10184418
Manufacturer Part Number: 761368-00

This is a genuine replacement bracket assembly. It is supplied directly from original equipment manufacturer for use with bench grinders. This bracket helps to secure the eyeshield to the main unit. It is made out of metal and it is sold individually. Please note the hardware and the eyeshield are both sold separately. To complete this repair you would need a screwdriver and a wrench. • Make sure the unit is unplugged • Remove the screws that secure the eyeshild • Remove the nut and the carriage bolt • Replace old bracket with a new one • Reassemble in reverse order

Tool Rest

$14.42

Fix Number: FIX10168756
Manufacturer Part Number: 286066-00

This is a genuine manufacturer sourced replacement part designed for use with Dewalt bench grinders. This tool rest acts as a support for the material when the grinder is in use. It is made out of metal and it is sold individually. Please note the screw and the nut used to secure it to the unit are sold separately. You would need a wrench to complete this repair.

Bracket,l. Mtg.

$6.69

Fix Number: FIX10184421
Manufacturer Part Number: 761371-00

The bracket attaches to the washer and the knob and is made of metal. It is an authentic OEM sourced item which is specially produced for use with bench grinders made by DeWALT and Black & Decker. Keep in mind this high-quality part is sold individually. A screwdriver may be helpful when replacing this item. This part may become broken and will need to be replaced.

Bench Grinder Eye Shield Kit

$8.77

Fix Number: FIX10168857
Manufacturer Part Number: 286449-00

This is a genuine OEM approved replacement part designed for bench grinders. It helps to protect user and the users eyes from dust and debris while the grinder is in use. This part is made out of clear plastic with metal. To replace this eyeshield you would need a screwdriver to secure it to the unit. This set includes two (2) shields per order.

Eyeshield

$29.12

Fix Number: FIX10184433
Manufacturer Part Number: 761834-00

This is a Genuine OEM replacement part used on Bench Grinders. It helps to protect user and the users eyes from the debris while the Grinder is in use. This part is made out of Clear Plastic with a Metal Bracket. To replace this Eyeshield you would need a Screwdriver to secure it to the unit.

BRUSH

$15.74

Fix Number: FIX18986814
Manufacturer Part Number: 848790

This is a genuine OEM replacement carbon brush designed for use with Delta and Porter Cable power equipment. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are a commonly replaced item on power tools. Carbon brushes through friction and use will gradually wear away and will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver and pliers to complete this job. • First remove screws holding the cover together • Remove the housing to gain access to armature and brush holder • Remove the old brush • Install the new brush • Reassemble and test your tool

Bracket

$6.51

Fix Number: FIX10184420
Manufacturer Part Number: 761370-00

This item has been sourced from the original manufacturer and is intended to be used with bench top grinders from Black & Decker and DeWalt. The metal bracket attaches to the top of the left wheel guard and is used to mount the left side eye shield. The bracket can be purchased as a single item, please note the hardware and eye shield are separate items.

Knob

$6.51

Fix Number: FIX10168755
Manufacturer Part Number: 286065-00

This is a genuine manufacturer sourced replacement part designed for use with grinders. This knob helps to secure/adjust the eye shield. Replacing this part does not require any tools, this knob is secured with a carriage bolt (sold separately). This knob is made out of plastic and it is sold individually.

Popular Bench Grinder Parts

Bench Grinder Brands

Related Bench Grinder Parts

Popular Bench Grinder Models

Bench Grinder Parts

Start With Your Model Number

Popular Bench Grinder Parts

Bench Grinder Brands

Related Bench Grinder Parts

Popular Bench Grinder Models