Caulking Gun Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Shop By Brand Shop By Part Type

Popular Caulking Gun Parts

Ring Retaining 0.8mm Thk – Part Number: 44-86-1380
Ring Retaining 0.8mm Thk
$6.51
In Stock
Fix Number
FIX10131977
Manufacturer Part Number
44-86-1380
This is an authentic OEM part which is designed for use with Milwaukee tools. It is a special hardware which helps to secure components. This is an identical replacement for a damaged or a faulty part that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct installation of this retaining ring. You will need snap-ring pliers to remove the old part and secure the new one. One durable metal retaining ring is included.
Plunger Rod With Handle – Part Number: 44-94-0075
Plunger Rod With Handle
$11.79
In Stock
Fix Number
FIX11878423
Manufacturer Part Number
44-94-0075
This is the special plunger rod with a handle that provides a user with a comfortable grip to operate the tool. Unfortunately, over time it can wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality part is made of durable materials and is sold individually. This authentic component is supplied by the original equipment manufacturer for use with Milwaukee grease guns.

Installation Instructions

Suffolk from WALTHAM, MA
Rod broke
Removed retainer clips Read more...
Self-locking Retaining Ring – Part Number: 44-86-1400
Self-locking Retaining Ring
$6.51
In Stock
Fix Number
FIX11878393
Manufacturer Part Number
44-86-1400
It is an authentic manufacturer-sourced part that is supplied directly from the original equipment manufacturer for use with Milwaukee grease guns. This is the replacement self-locking retaining ring for the barrel assembly, please refer to the diagrams of your model for correct location and use of this hardware. Note this item is made of durable metal and it is sold individually.
Rubber Gasket – Part Number: 43-44-0087
Rubber Gasket
$6.51
In Stock
Fix Number
FIX11878119
Manufacturer Part Number
43-44-0087
Rubber Seal – Part Number: 45-06-0890
Rubber Seal
$6.51
In Stock
Fix Number
FIX11878449
Manufacturer Part Number
45-06-0890
This is the seal for the barrel assembly, please make sure to check appropriate diagram for correct location and use of this item. It is an authentic replacement part that is specially designed for use with a Milwaukee grease gun. Over time seals tend to deteriorate and shrink eventually requiring replacement. It is made from durable rubber material and it is sold individually.
10 Oz. Cartridge Holder – Part Number: 31-01-1800
10 Oz. Cartridge Holder
$11.28
In Stock
Fix Number
FIX10125076
Manufacturer Part Number
31-01-1800
It is a genuine item that is supplied directly from original equipment manufacturer for use with Milwaukee cordless caulk and adhesive guns. This replacement holder is used to secure the 10 Oz. cartridge which is sold separately. Please note this high quality plastic item is sold individually.
Stamping Plate – Part Number: 44-66-1525
Stamping Plate
$6.51
On Order
Fix Number
FIX11878334
Manufacturer Part Number
44-66-1525
The stamping plate goes between the barrel assembly and the rubber seal. Keep in mind that this high-quality part is sold individually. This is an authentic Milwaukee replacement item that is sourced from the original manufacturer for use with grease guns. A screwdriver and a set of pliers might be required during the replacement of this part. It is made of metal and will need to be replaced if it breaks.
Sausage Plunger – Part Number: 44-70-0375
Sausage Plunger
$10.38
In Stock
Fix Number
FIX10131726
Manufacturer Part Number
44-70-0375
This is a manufacturer-approved sausage plunger for a caulk and adhesive gun. This part pushes the caulk through the gun. The plunger is attached to the plunger rod and fits snuggly inside the barrel. Due to the constant rubbing against the barrel, the sausage plunger will need to be replaced over time. For this repair, start by removing the cartridge from the gun by unscrewing the cartridge from the mounting cap. Pull the cartridge away from the plunger, and remove it from the rod. The new plunger can now be installed by placing it on the rod and securing it with the screw. To complete the repair, install the barrel back onto the gun.
Barrel Assembly – Part Number: 30-06-0205
Barrel Assembly
$77.12
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11877438
Manufacturer Part Number
30-06-0205
This item is an original part from Milwaukee for use in grease guns. The barrel assembly attaches to the stamping plate. You may need a screwdriver when replacing this part. Over time this item may break or wear down and will need to be replaced. It is made of metal and plastic and is sold individually.
Plunger – Part Number: 44-70-0330
Plunger
$6.55
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10131724
Manufacturer Part Number
44-70-0330
The plunger fits between the hex nut and the cartridge holder and is made out of plastic. It is priced individually but also includes a single metal phillips head screw. This genuine item is supplied directly from the original equipment manufacturer for use with Milwaukee cordless caulk and adhesive guns. A screwdriver may be needed to help replace this part.

Caulking Gun Brands

Related Caulking Gun Parts

Popular Caulking Gun Models

View More
+