This is a manufacturer-approved sausage plunger for a caulk and adhesive gun. This part pushes the caulk through the gun. The plunger is attached to the plunger rod and fits snuggly inside the barrel. Due to the constant rubbing against the barrel, the sausage plunger will need to be replaced over time. For this repair, start by removing the cartridge from the gun by unscrewing the cartridge from the mounting cap. Pull the cartridge away from the plunger, and remove it from the rod. The new plunger can now be installed by placing it on the rod and securing it with the screw. To complete the repair, install the barrel back onto the gun.
Questions and Answers
Be the first to ask our experts a question about this part!
Manufacturer Part Number: 44-70-0375