Lawn Tractor Accessories Parts

Popular Lawn Tractor Accessories Parts

Bag Frame
$15.35
In Stock
Fix Number
FIX18285035
Manufacturer Part Number
3705442002
This is a black metal lawn mower bag frame for EGO 20-inch and 21-inch plastic deck models. It cannot be used on the 20-Inch brushless steel deck model. The bag frame holds the grass catcher securely in place. This is the frame only; the bag is sold separately. This is an easy installation process that you can do yourself in just a few minutes. It is an OEM part, ensuring a perfect fit.
Wheel Assembly
$18.65
In Stock
Fix Number
FIX18279405
Manufacturer Part Number
2825267001
This is a single OEM rear wheel assembly for a lawnmower. It is a black wheel with a green stripe along the rim. This wheel features a single gear and an outer white ring gear. Be sure to remove the battery pack before servicing your lawnmower. To replace the wheel, start by turning the mower on the side. Use a flat-blade screwdriver to remove the dust cover from the wheel. Next, use an adjustable or 1/2-Inch (13mm) wrench and turn the bolt counterclockwise to remove it. Remove the bolt, damaged wheel, and wave washer from the wheel axle. If you are replacing the rear wheel for the self-propelled mower, remove the drive gear from the damaged wheel and assemble to the new wheel with the 3 screws. Next, mount the wave washer and the new wheel on the wheel axle with the round recess facing outward. Lock the wheel with the bolt by tightening the bolt in a clockwise motion. Finally, mount the dust cover onto the wheel and push into position.
Nut-flglk 5/16-18
$6.51
In Stock
Fix Number
FIX9092936
Manufacturer Part Number
712-04063
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop!
Read more...
Grass Catcher
$30.75
In Stock
Fix Number
FIX18285901
Manufacturer Part Number
3800109002
This is a grass catcher, also commonly known as a grass bag. Much like its name indicates, it collects the grass clippings produced when mowing the lawn. If yours has become ripped or damaged, this is the OEM replacement part you will need. It is mostly black in color with the EGO branding on the side. The grass bag volume is 2.0 Bushel (70L). Keep in mind that the bag frame is sold separately, this part includes only the bag. Before attaching or removing the grass catcher, turn off the motor, make sure the blades have come to a complete stop, and remove the battery. Make sure the mulching insert or side discharge chute have been removed before attaching the grass catcher. Adjust the handle to the grass bag attachment/removal position, lift the rear-discharge door, hook the grass bag assembly on the pivot rod and release the discharge door so it rests on the grass bag.
Lawn Mower Hood Latch
$6.55
In Stock
Fix Number
FIX9012105
Manufacturer Part Number
532109808
This is an original part from Husqvarna. The hood latch is constructed of flexible plastic, and is made for use with many riding lawn mowers. This component is fastened onto the lower bagger chute, latching it to the upper chute. The hood latch is sold individually. A pair of pliers and a screwdriver may be helpful for the removal and replacement.
Lawn Mower Flanged Lock Nut
$6.51
In Stock
Fix Number
FIX9095080
Manufacturer Part Number
712-04065
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.
CARBON BRUSH SET
$7.74
In Stock
Fix Number
FIX19500973
Manufacturer Part Number
1607014144
This part includes two genuine carbon brushes with wire lead attached. If your motor is not performing smoothly, in most cases this is due to worn brushes. Carbon brushes are a common wear part that should be inspected and replaced on a regular schedule. Replace the carbon brushes if the wire lead has cracks or burns, and check the armature as well.
Cover Seal
$28.55
In Stock
Fix Number
FIX9020848
Manufacturer Part Number
532192550
This item is available as an individual replacement part. The bagger seal attaches to the cover gasket and is made of rubber. A wrench might be helpful during the installation of this part. It will need to be replaced if it becomes broken. This is an authentic part from Husqvarna for use in collection systems and grass catchers.
Nut-flglk
$6.51
In Stock
Fix Number
FIX9299574
Manufacturer Part Number
712-04064
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.
Nut-lock, Ni
$6.55
In Stock
Fix Number
FIX9276436
Manufacturer Part Number
3296-29
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It is used as part of the shear bolt assembly, as well as other areas in your machine. The nyloc nut has a diameter of roughly a 1/4 inch.

Lawn Tractor Accessories Brands

Related Lawn Tractor Accessories Parts

Popular Lawn Tractor Accessories Models